Operating Instructions
Prior to using for the first time
Prior to using for the first time, remove all the clips with which the dish racks are secured for transport.
Then perform the following steps: 0 1. Adjust the water softener
2.Filling with Special Salt for the Water Softener
3.Filling with Rinse Aid
Adjusting the Water Softener
| To prevent the build up of scale on dishes and in the dishwasher, the |
| dishes must be washed with soft, i.e. low lime content water. For this |
| reason the dishwasher is fitted with a water softener in which tap |
| water from a hardness of 4 °d (German degree) is softened with the aid |
| of special salt. |
3 | Your water supplier will be able to inform you on the hardness and |
| hardness range of the water in your area. |
0Adjust the water softener to the setting given in the table that corre- sponds to the hardness of the water in the area where you live. The water softener can be adjusted in 10 steps.
| Water Hardness |
| Adjust | Indication on the | ||
in °d1) |
| in mmol/l2) | Range | to Hardness Setting | ||
|
| 9 | H 9 | |||
|
| 8 | H 8 | |||
| IV | 7 | H 7 | |||
|
| 6 | H 6 | |||
|
| 5 | H 5 | |||
|
|
|
|
|
|
|
|
| III | 4 | H 4 | ||
|
| 3* | H 3 | |||
|
|
| ||||
|
| II | 2 | H 2 | ||
|
| I/II | 1 | H 1 | ||
under 4 |
| under 0.7 |
| I | 0 | H 0 |
|
| no salt necessary | ||||
|
|
|
|
|
| |
|
|
|
|
|
|
|
1)(°d) German degree, measure of water hardness
2)(mmol/1) millimol per litre, international unit for the hardness of water *Factory setting
11