152
VQT3K69
When viewing 3D video, we recommend
taking a break every 30 to 60 minutes.
≥Viewing for extended periods may cause
eye-fatigue.
Short-sighted or far-sighted persons,
those with differences in the sight of their
right and left eyes, and those with
astigmatism are advised to correct their
vision by wearing glasses etc.
Stop viewing if you can clearly see a
double image while viewing 3D video.
≥There are differences in the way that
different people experience 3D video
images. Please correct your sight
appropriately before viewing 3D video.
≥You can change the 3D setting of your
television or 3D output setting of the unit
to 2D.
When viewing 3D video on a 3D
compatible television, position yourself a
distance away that is at least 3 times the
effective height of the television.
≥(Recommended distance):
For 42z; approx. 1.6 m (5.2feet),
for 46z; approx. 1.7 m (5.6 feet),
for 50z; approx. 1.9 m (6.2 feet),
for 54z; approx. 2.0 m (6.6 feet).
≥Viewing from a distance closer than the
recommended distance may lead to eye-
fatigue.
Viewing of 3D video is not recommended
for children under 5 to 6 years.
≥It is difficult to know how children will react
to tiredness or discomfort, and they may
become ill suddenly.
≥When children are viewing, have a
responsible adult ensure that eye-fatigue
does not occur.
When disposing of or giving away the SD
card, note that:
≥Formatting and deletion of this unit or
computer only changes the file
management information and does not
completely delete the data in the SD card.
≥It is recommended that the SD card is
physically destroyed or the SD card is
physically formatted using this unit when
disposing of or giving away the SD card.
To physically format the SD card, connect
the unit via the AC adaptor, select
[SETUP] #[FORMAT MEDIA] # [SD
CARD] from the menu, and then press
and hold the recording start/stop button on
the screen below for about 3seconds.
When the SD card data deletion screen
appears, select [YES], and then follow the
on-screen instructions.
≥The customer is responsible for the
management of the data in the SD card.
≥When the LCD monitor gets dirty, wipe it
with a soft cloth such as eye glass cleaner.
≥Do not touch the LCD monitor with your
finger nails, or rub or press with strong
force.
≥It may become hard to see or hard to
recognize the touch when the LCD
protection sheet is affixed.
≥In a place with drastic temperature
changes, condensation may form on the
LCD monitor. Wipe it with a soft cloth such
as eye glass cleaner.
≥When the unit has become very cold, for
example due to storage in a cold area, its
LCD monitor will be slightly darker than
usual immediately after the unit is turned
About the SD cardLCD monitor/viewfinder
HDCTM900&HS900P&PC-VQT3K69_mst.book 152 ページ ２０１０年１２月１６日　木曜日　午後７時８分