27
VQT3K69

Inserting/removing an SD card

Caution:
Check that the access lamp has gone off.
1Open the LCD monitor.
2Open the SD card/terminal

cover and insert (remove) the

SD card into (from) the card

slot.

≥Face the label side B in the direction
shown in the illustration and press it
straight in as far as it will go.
≥Press the center of the SD card and then
pull it straight out.
3Securely close the SD card/

terminal cover.

≥Securely close it until it clicks.
≥Do not touch the terminals on the back of
the SD card.
≥Do not apply strong shocks, bend, or drop
the SD card.
≥Electrical noise, static electricity or the
failure of this unit or the SD card may
damage or erase the data stored on the
SD card.
≥When the card access lamp is lit, do not:
jRemove the SD card
jTurn the unit off
jInsert and remove the USB cable
jExpose the unit to vibrations or shock
Performing the above while the lamp is on
may result in damage to data/SD card or
this unit.
≥Do not expose the terminals of the SD
card to water, dirt or dust.
≥Do not place SD cards in the following
areas:
jIn direct sunlight
jIn very dusty or humid areas
jNear a heater
jLocations susceptible to significant
difference in temperature (condensation
can occur.)
jWhere static electricity or
electromagnetic waves occur
≥To protect SD cards, return them to their
cases when you are not using them.
≥About disposing of or giving away the SD
card. (l152)
When using an SD card not from Panasonic, or one previously used on other equipment,
for the first time on this unit, format th e SD card. (l51) When the SD card is formatted, all
of the recorded data is deleted. Once the data is deleted, it cannot be restored.

Access lamp [ACCESS] A

≥When this unit is accessing the SD
card or built-in memory, the access
lamp lights up.
HDCTM900&HS900P&PC-VQT3K69_mst.book 27 ページ ２０１０年１２月１６日　木曜日　午後７時８分