151
VQT3K69
When the status indicator is flashing at a
particularly fast or slow rate, the
following should be considered.
Flashing with approx. 4 second period
(off for approx. 2 seconds, on for approx.
2 seconds):
When the battery is over discharged or the
temperature of the battery is too high or
low. It can be charged, but it may take a
few hours to complete the charging
normally.
It will flash in 2 second intervals when
normal charging resumes. Even in such
cases, it may start flashing in 4second
intervals until charging is completed
depending on the conditions of use.
Flashing with approx. 0.5 second period
(off for approx. 0.25 second, on for
approx. 0.25 second):
The battery is not charged. Remove the
battery from the unit, and try charging
again.
Check that the terminals of the unit or
battery are not dirty or covered with a
foreign object, and connect the battery
correctly once again. If a foreign object or
dirt is present, turn off the unit before
removing.
The battery or environment is at an
extremely high or low temperature. Wait
until the temperature has returned to an
appropriate level and try charging again. If
you are still unable to charge, there may
be a fault in the unit, battery or AC
adaptor.
Off:
Charging has finished.
If the status indicator stays off despite the
charging being unfinished, there may be a
fault in the unit, battery or AC adaptor.
Refer to page 149 for details on the
battery.
About 3D recording
Attach the 3D Conversion Lens securely.
It must not be used with an insec ure
attachment.
Do not use the 3D Conversion Lens
without adjusting it first.
It will not be possible to record 3D video
correctly, and this may lead to tiredness or
discomfort.
When you re-attach the 3D Conversion
Lens after removing it, we recommend
making the adjustments again.
With the 3D Conversion Lens attached,
do not record a subject at less than the
minimum focus distance.
The 3D effects may be more pronounced,
and therefore cause tiredness or
discomfort.
The minimum focus distance is approx.
1.2 m (3.9 feet).
When recording with the 3D Conversion
Lens attached, be careful not to shake
the unit.
Tiredness or discomfort may result if the
shake is pronounced, due to riding in a
vehicle or walking etc.
When moving the unit as you record,
move it slowly.
We recommend using a tripod.
About 3D viewing
Anyone who is hyper sensitive to light,
suffers from heart disease or is otherwise
unwell should avoid viewing 3D video.
Doing may have an adverse affect on
such medical conditions.
If you feel tired, uncomfortable or
otherwise strange when viewing 3D
video, stop viewing at once.
Continuing to view may cause illness.
Please rest appropriately after stopping
the viewing.
About status indicator during charging About 3D
HDCTM900&HS900P&PC-VQT3K69_mst.book 151 ページ 2010年12月16日 木曜日 午後7時8分