31
VQT3K69

∫To display the Touch Menu

≥Do not touch on the LCD monitor with hard pointed tips, such as ball point pens.
≥Perform the touch screen calibration when the touch is not recognized or wrong location is
recognized. (l52)
When the unit is turned on for the first time, a message asking you to set the date and time
will appear.
Select [YES] and perform steps 2 to 3 below to set the date and time.
1Select the menu. (l44)
2Touch the date or time to be set, then set the desired value using /

.

ADisplaying the World time setting (l46):
[HOME]/ [DESTINATION]
≥The year can be set between 2000 and 2039.
≥The 12-hour system is used to display the time.
3Touch [ENTER].
≥A message prompting for World time setting may be
displayed. Perform the World time setting by touching the screen. (l46)
≥Touch [EXIT] to complete the setting.
≥The date and time function is driven by a built-in lithium battery.
≥When this unit is purchased, the cl ock is set. If the time display becomes [- -], the built-in
lithium battery needs to be charged. To re charge th e built-i n lithium batt ery, connect the AC
adaptor or attach the battery to this unit . Le ave t he uni t as it is fo r ap prox. 24hours and the
battery will maintain the date and time for approx. 6months. (The battery is still being
recharged even if the unit is off.)
The Touch Menu will disappear when no functi on is
performed for a specific period of time during
Recording mode. To display it again, touch .
Preparation
Setting date and time
: [SETUP] # [CLOCK SET]
MENU
HDCTM900&HS900P&PC-VQT3K69_mst.book 31 ページ ２０１０年１２月１６日　木曜日　午後７時８分