Panasonic HDC-TM900P/PC, HDC-HS900P/PC owner manual Others, 147

	Others
Problem	Check points
Item other than the	≥ Calibrate the touch screen. (l 52)
touched one is selected.
If the SD card is inserted	≥ If the SD card is formatted on a PC, it may not be
in this unit, it is not	recognized by this unit. Use this unit to format SD cards.
recognized.	(l 51)
The remote control does	≥ [REMOTE CONTROL] of the [SETUP] is [OFF]. (l 53)
not function.	≥ The button-type battery of the remote control may have
	run out. Replace it with a new button-type battery. (l 53)

∫If scenes do not change smoothly when played back on another

device (AVCHD, 1080/60p)

The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another unit.

≥Just how smoothly the scenes will be played back depends on the playback unit. Depending on the unit used, the images may stop moving and become still for a moment even when none of the following conditions are applicable.

≥A continuous recording of motion picture data that exceeds 4 GB may momentarily stop at every 4 GB of data when played back with another device.

≥It may not play back smoothly when the editing of scenes was done with the HD Writer AE 3.0, but it will play back smoothly if you set the seamless settings in the HD Writer AE 3.0. Refer to the operating instructions for the HD Writer AE 3.0.

Principal reasons for not playing back smoothly

≥When the scenes were recorded on different dates

≥When scenes lasting under 3 seconds have been recorded

≥When PRE-REC was used for recording

≥When the Interval recording is used

≥When deleting scenes

≥When selected scenes are copied between an SD card and the built-in memory/HDD

≥When selected scenes are copied to a disc in a connected DVD burner

≥When scenes recorded with more than 99 scenes on the same date

147

VQT3K69