Manuals / Brands / Photography / Camcorder / Panasonic / Photography / Camcorder

Panasonic HDC-HS900P/PC, HDC-TM900P/PC Quick Guide

1 176

Download 176 pages, 10.69 Mb

13

VQT3K69

∫Inserting the battery

Install the battery by inserting it in the

direction shown in the figure.

AInsert the battery until it clicks and locks.

∫Charging the battery

ADC input terminal

1Connect the AC adaptor to the DC input

terminal.

2Connect the AC cable to the AC

adaptor, then the AC outlet.

≥The status indicator will flash red at an

interval of 2 seconds, indicating that

charging has begun.

It will turn off when the charging is

completed.

∫Inserting/removing an SD card

1) Open the LCD monitor.

≥Check that the access lamp has gone off.

2) Open the SD card/terminal cover and

insert (remove) the SD card into (from)

the card slot.

≥Face the label side B in the direction

shown in the illustration and press it

straight in as far as it will go.

≥Press the center of the SD card and then

pull it straight out.

3) Securely close the SD card/terminal

cover.

≥Securely close it until it clicks.

Quick Guide





Access lamp [ACCESS] A

≥When this unit is accessing the SD

card or built-in memory, the access

lamp lights up.





HDCTM900&HS900P&PC-VQT3K69_mst.book 13 ページ２０１０年１２月１６日　木曜日　午後７時８分

Contents

Main Things You Should Know Safety Precautions WARNING: CAUTION! CAUTION Page Concerning the battery AC adaptor Batteries Warni ng Product Identification Marking CAUTION U.S.A./CANADA CONSUMERS: ATTENTION: IMPORTANT SAFETY INSTRUCTIONS Precautions WARNING CAUTION About the recording format for recording motion pictures Indemnity about recorded content Handling of built-in memory [HDC-TM900] Handling of HDD [HDC-HS900] Cards that you can use with this unit For the purposes of this owners manual Contents Preparation Basic Advanced (Recording) Advanced (Playback) Copy/Dubbing With a PC Others Accessories Inserting the battery Charging the battery Inserting/removing an SD card Quick Guide Turning the unit on/off Selecting a mode How to use the touch screen Language selection Selecting a media to record Recording motion pictures Recording still pictures Motion picture/Still picture playback C Parts identification and handling 24 25 26 27 28 353231 36 37 34 38 33 Page About batteries that you can use with this unit Inserting/removing the battery Install the battery by inserting it in the direction shown in the figure. Power supply Removing the battery Charging the battery 1 2 Connecting to the AC outlet Charging and recording time Charging/Recording time Page Battery capacity indication Cards that you can use with this unit Recording to a card Inserting/removing an SD card 1 2 cover and insert (remove) the SD card into (from) the card slot. 3 terminal cover. Access lamp [ACCESS] A Turning the unit on/off To turn off the unit Operate the mode switch to change the mode to , or . Touch Selecting a mode How to use the touch screen Slide while touching About the operation icons About the Touch Menu Touch (left side)/ (right side) of on the Touch Menu. To display the Touch Menu 1 2 . Setting date and time Before recording Basic camera positioning Basic motion picture recording Page 1 2 3 4 Selecting a media to record 2 3 Recording motion pictures About the compatibility of the recorded motion pictures 2 3 4 Recording still pictures About the screen indications in Still Picture Recording About the focus indication About the focusing area Recording still pictures in Motion Picture Recording Mode Change the mode to . Press the button fully (press to the bottom) to take the picture. Intelligent Auto Mode Intelligent auto/Manual button Intelligent Auto Mode Automatic white balance Auto focus 2 3 4 Motion picture/Still picture playback 5 Change the thumbnail display Speaker/Headphone volume adjustment Motion picture compatibility Still picture compatibility 1 2 3 4 Using the menu screen Using the quick menu 1 2 3 1 Touch [SET WORLD TIME]. 2 Touch [HOM E]. 3 Touch / to select your home region and touch [ENTER]. Using the Setup Menu [CLOCK SET] [SET WORLD TIME] 5 Touch / to select your travel destination and touch [ENTER]. To return the display to the home setting [DATE/TIME] [DATE FORMAT] [ECONOMY] 1S e t [ 2 Close the LCD monitor and retract the viewfinder while the mode is set to 3 Open the LCD monitor or extend the viewfinder. [QUICK POWER ON] [QUICK START] [REMOTE CONTROL] 1T o u c h [ 2 Touch the desired setting item. 3 Touch / to adjust settings. 4 Touch [ENTER]. [REC LAMP] [ALERT SOUND] [POWER LCD] [LCD SET] Page 1 Touch [FORMAT MEDIA]. 2Touch [SD CARD] or [Built-inMemory]. Touch [SD CARD] or [HDD]. [FORMAT MEDIA] [MEDIA STATUS] Page Using with the remote control Replacing a button-type battery Remote control usable range Operation of direction buttons/OK button 15 1515 1 2 direction button. 3 pressing the OK button. Zoom in/out function Zoom lever/Zoom buttons Changing Image Stabilizer Mode Image Stabilizer Function Optical image stabilizer button 1080/60p recording 1 the Touch Menu to display Touch function icons. (l30) 2 Touch the Touch function icon. Recording with the Touch function Touch Zoom 2 Touch the object and lock the target. 3 Start recording. About target frame AF/AE tracking 1 Press the Optical Image Stabilizer button to turn the image stabilizer on. 2 Touch and hold . To set the display method of the Optical Image Stabilizer Lock icon 2 Touch the subject. Optical Image Stabilizer Lock Touch Shutter 1 Recording functions of operation icons To select the color for Fade in/out Fade Intelligent contrast control PRE-REC only) To adjust the brightness of the flash Smile shot Built-in flash To stop the timer midway through Red-Eye Reduction Self-timer Intelligent exposure Backlight compensation Soft skin mode Displaying Guidelines at playback Tele macro Guideline Color Night Rec Headphone volume adjustment Recording functions of menus [SCENE MODE] [ZOOM MODE] [REC MODE] [TIME LAPSE REC] [DIGITAL CINEMA] [RELAY REC] [FACE RECOG.] Registering a face for face recognition 1 Align the persons face with the guide. 2 Touch [REC] or press the button fully. 3 Entering the persons name. 4 Touch [ENTER] to end registration. Changing the information of a registered person 2 Touch the desired item to enter the setting. 3 Touch [ENTER]. Canceling a registered person 2 Touch the person to cancel. [NAME DISPLAY] [FACE FRAMING] [AUTO SLOW SHTR (2D)] [AUTO SLOW SHTR (3D)] [AGS] [Digital Cinema Color] [SHOOTING GUIDE] [WIND NOISE CANCELER] [MIC SETUP] 2 Touch / to adjust. 3 Touch [ENTER] to set the microphone input level and then touch [EXIT]. [MIC LEVEL] 2 Touch the desired setting items. 3 Touch / to adjust settings. 4 Touch [ENTER]. [BASS SETTING] [PICTURE ADJUST] [ZEBRA] [LUMINANCE] [HISTOGRAM] Example of the display Picture size and Maximum zoom ratio Picture size in Motion Picture Recording Mode [PICTURE SIZE] [QUALITY] [ASPECT RATIO] 2 Press the button. 3 Touch [Record] or [Delete]. 4 [HI-SPEED BURST] [AF ASSIST LAMP] [SHTR SOUND] 1 2 1 Manual recording White balance 1 2 To set the white balance manually Manual shutter speed/iris adjustment 1 2 Recording with Manual focus 1 2 3 4 manual ring. Recording 3D video Recording 3D video 4 5 start recording. Functions that cannot be used during 3D recording Functions not available during 3D recording Motion picture playback using operation icon Playback Operations Creating still picture from motion picture 1 playback. 2 Highlight&Time frame index 1 2 3 Touch / to set the time. 2 1 4 Various playback functions Highlight Playback 1 2 3 Touch [Enter]/[ENTER]. Touch [SET] to select the item to change. 3 4 Priority setting 1 Touch [FACE] or [FACE RECOG.]. 2(When [FACE RECOG.] is selected) Touch a face to specify. Playback time setting Touch the playback time. 1 2 3 4 5 1 Deleting scenes/still pictures When you stop deleting halfway To complete editing Dividing a scene (AVCHD, 1080/60p) 2 3 4 To delete all the divided points Dividing a scene to partially delete (iFrame) 2 3 4 5 6 7 To complete editing 2 3 When you stop deleting halfway Protecting scenes/still pictures 2 2 3 4 DPOF setting 1 2 3 4 Relay scene combining To cancel relay information 1 Watching Video/Pictures on your TV 2 3 To display the on-screen information on the TV Connecting with a HDMI mini cable Listening in 5.1 channel sound (AVCHD, 1080/60p) Changing the component output setting Connecting with the AV multi cable Change the mode to . Playback using VIERA Link 3 Other linked operations 1) 2) 2 3D video playback Functions not available during 3D playback Check the used space of the copy destination 2 Copying between SD card and Built-in Memory/HDD Copying 3 4 When you stop copying halfway Approximate time for copying Preparing for copying/playing back Connecting a DVD burner to copy to/ play back a disc We recommend using Panasonic DVD burner VW-BN01. Page Copying to discs 1 2 3 4 About recording formats when copying motion pictures [AVCHD] ([HA]/[HG]/[HX]/[HE]): [Standard] ([XP]/[SP]): Important Notice Approximate time for copying to a disc Playing back the copied disc 1 2 back. Managing the copied disc Formatting discs 2 To release the disc protection Displaying disc information Check before dubbing Dubbing with a Blu-ray disc recorder, video device, etc. 1 Dubbing in high-definition picture quality 2 3 4 definition (AVCHD) compatible DVD recorder . 1 2 3 Dubbing in standard picture quality Copying unaltered as 3D video Copying after conversion to 2D video 3D video storage Copying with a DVD burner Dubbing with a Blu-ray disc recorder, video device, etc. Copying scenes recorded in 3D Copying between SD card and built-in memory/HDD Using HD Writer AE 3.0 Using a Mac HD Writer AE 3.0 Smart Wizard What you can do with a PC About Conversion Assist Function Important Notice http://panasonic.net/avc/sdcard/information/SDXC.html End User License Agreement Operating environment for HD Writer AE 3.0 Operating environment To use the HDWriter AE 3.0 Operating environment for the card reader function (mass storage) Installation 1 2 3 4 5 Page Connecting to a PC 1 2 3 4 To disconnect USB cable safely About the PC display DCIM Copying your still pictures to your PC CAM_SD DCIM Starting HD Writer AE 3.0 If using Mac 1 2 3 4 Recording indications Indications R 1h20m 0h00m00s 1h30m 1h30m Page Playback indications Indication of connection to other devices Confirmatory indications Confirmatory indications when a DVD burner is connected Messages About recovery Troubleshooting Power Indication Recording Playback With other products Recording With other products With a PC If scenes do not change smoothly when played back on another device (AVCHD, 1080/60p) Others Cautions for use About this unit About the battery About the AC adaptor About 3D recording About 3D viewing About status indicator during charging About 3D About the SD card LCD monitor/viewfinder Causes of condensation About condensation About personal information About copyright Carefully observe copyright laws Licenses Recording modes/approximate recordable time Approximate number of recordable pictures Page Specifications Page 3D Conversion Lens (optional) Motion pictures Still pictures Optional accessories Page Page Accessory Order Form HDCTM900&HS900P&PC-VQT3K69_mst.book 166 In CANADA, please contact your local Panasonic dealer for more information on Accessories. Others Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO) Limited Warranty Limited Warranty Coverage (For USA and Puerto Rico Only) Product or Part Name Parts Labor Page Others HDCTM900&HS900P&PC-VQT3K69_mst.book 169 Warra nty Panasonic Canada Inc. PANASONIC PRODUCT LIMITED WARRANTY Camcorder Products - One (1) year, parts and labour Index Numerics A B C L M N O P Spanish Quick Use Guide/Gua espaola para el uso rpido Encender/apagar el dispositivo Seleccin del modo Cmo usar la pantalla tctil Seleccin del idioma en la para Toque Seleccionar un medio para grabar Reproduccin de pelcula/ fotografa P