Supplied Accessories

TV

Infrared Remote Control

RRMCG1324CESC

Size AA

Dry Batteries

Before Operating Your Television

Location

¥For normal operation, your TV should be located in an area of the room where cool adequate ventilation is provided. Do not place the back of the television set in a place where free airflow will be restricted.

¥Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using magnets or any other magnetic substance, such as iron are kept well away from the TV set.

Power

Your TV operates on 120 Volts, 60 Hz (normal household current) and has a polarized plug. If you are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an electrician. Do not defeat the safety feature of the polarized plug.

Note:

¥If the set is not going to be used for a long period, such as during a vacation, unplug the set from the wall outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the POWER BUTTON in the OFF position.)

¥Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off the radio.

¥If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received due to interference from the TV.

¥Before using the television, prepare the Remote Control To use the remote control, insert batteries first.

Inserting the batteries

Pull up

Battery

Cover

 

¥With your thumbnail, pull up the slit as indicated by the arrow to remove the battery cover. Insert two batteries (size ÒAAÓ). Be sure to match the battery e/d terminals with the e/d marks inside the compartment.

Antenna Connections

Antennas

¥The antenna requirements for good color television reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended.

The following is a brief explanation of the type of connections that are provided with the various antenna systems:

1.A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (not supplied).

2.A 300-ohm system is a flat Òtwin-leadÓ cable that can be attached to a 75-ohm terminal through a 300/75-ohm ADAPTOR (not supplied).

F-type connector

75-ohm coaxial cable (round)

300-ohm twin-lead cable (flat)

5

32C231(05-06)

5

3/27/03, 11:13 AM

Dimension: 140mm x 215mm

Page 5
Image 5
Sharp 32C231 operation manual Supplied Accessories, Before Operating Your Television, Antenna Connections