133
VQT3K69
Connect this unit to the PC after the software applications are installed.
Remove the supplied CD-ROM from your PC.
AUSB cable (supplied)
Insert the plugs as far as they will go.
1Connect this unit to the AC adaptor.
It is possible to use the unit connected to the PC with the batteries only, but you will not be
able to write data into the unit. Use the AC adaptor to free you from worrying about the
battery running down.
Connect with the AC adaptor when using the Conversion Assist Function.
2Turn on the unit.
This function is available in all modes.
3Connect this unit to a PC.
The USB function selection screen will appear.
4Touch [PC] on the screen of this unit.
The Smart Wizard Screen is automatically displayed when HDWriter AE 3.0 is installed.
This unit is automatically recognized as an external drive of the PC. (l135)
When you select an option other than [PC], reconnect the USB cable.
When using the battery, the LCD monitor tu rns off after about 5seconds. Touch the screen
to turn the LCD monitor on.
With a PC
Connecting to a PC
HDCTM900&HS900P&PC-VQT3K69_mst.book 133 ページ 2010年12月16日 木曜日 午後7時8分