134
VQT3K69
≥Do not use any other USB cables except the supplied one. (Operation is not guaranteed
with any other USB cables.)
≥When the unit is connected to a PC, it cannot be turned off.
Disconnect the USB cable, before tu rning this unit off.
≥When performing reading/writing between a PC and an SD card, be aware that some SD
card slots built into PCs and some SD card readers are not compatible with the SDHC
Memory Card or SDXC Memory Card.
≥When using an SDXC Memory Card, check the following support site.
http://panasonic.net/avc/sdcard/information/SDXC.html
∫To disconnect USB cable safely
Select the icon in task tray displayed on the PC, and then click [Eject Panaso nic
Camcorder].
≥Depending on your PC’s settings, this icon may not be displayed.
About the screen indication of the unit
≥Do not disconnect the USB cable, the battery or the AC adaptor while the access lamp
is on or card access icon ( ) appears on the unit screen.
≥
Do not disconnect the USB cable, the battery or the AC adaptor while the access lamp
is on or the built-in memory access icon ( ) appears on the unit screen.
≥
Do not disconnect the USB cable, the battery or the AC adaptor while the HDD access
lamp is on or HDD access icon ( ) appears on the unit screen.
≥If the screen does not change when the unit is operated while connected to a PC,
disconnect the battery and/or AC adaptor, wait approximately 1 minute, reconnect the
battery and/or AC adaptor, wait approximately 1 minute again, and then turn the unit
back on. (Data may be destroyed when above operation is performed while accessing
the SD card, built-in memory or HDD.)
HDC-TM900
HDC-HS900
HDCTM900&HS900P&PC-VQT3K69_mst.book 134 ページ ２０１０年１２月１６日　木曜日　午後７時８分