Panasonic HDC-HS900P/PC, HDC-TM900P/PC owner manual Shooting Guide, Wind Noise Canceler, MIC Setup

[SHOOTING GUIDE]

Message is displayed when this unit is moved rapidly.

MENU : [RECORD SETUP] # [SHOOTING GUIDE] # [ON]

When “CAMERA PANNING IS TOO FAST.” appears, move the unit slowly while recording.

≥Set to [OFF] to turn off the message indication.

≥Message will not appear while pausing the recording. (Message will appear even if it is pausing the recording if [DEMO MODE] is set to [ON].)

[WIND NOISE CANCELER]

This will reduce the wind noise coming into the built-in microphones while maintaining the realism.

≥Switch to Manual Mode. (l 82)

MENU : [RECORD SETUP] # [WIND NOISE CANCELER] # [ON]

≥This function’s default setting is [ON].

≥When switching to Intelligent Auto Mode, [WIND NOISE CANCELER] is set to [ON], and the setting cannot be changed.

≥You may not see the full effect depending on the recording conditions.

≥If wind sound cannot be reduced with the Wind noise canceler function alone, set [BASS SETTING] to [LOWCUT]. (l 76)

[MIC SETUP]

Recording setting of the built-in microphone can be adjusted.

≥Switch to Manual Mode. (l 82)

MENU : [RECORD SETUP] # [MIC SETUP] # desired setting

[SURROUND]: Sound is recorded with 5.1 ch surround microphone.

[ZOOM MIC]: Directivity of the microphone is synchronized with the zoom operation. Sounds near the front of the unit are recorded more clearly if you zoom in (close-up) and surrounding sounds are recorded more realistically if you zoom out (wide angle).

[FOCUS MIC]: Directivity of the center is enhanced for recording audio near the front of the unit more clearly.

[STEREO MIC]: Sound from two directions is recorded in 2 ch by forward-facing stereo microphones.

74

VQT3K69