90
VQT3K69

Creating still picture from motion picture

A single frame from the recorded motion picture can be saved as a still picture.
Picture size of the still picture to be recorded is (1920k1080).
1Pause at the scene you want to save as a still picture during

playback.

≥It is convenient to use slow-motion playback and frame-by-frame playback.
2Press the button fully.
≥Date the motion picture was recorded will be registered as date of the still picture.
≥Quality will be different from the normal still picture.

Highlight&Time frame index

An image of one scene is displayed as a thumbnail at set search condition. Scene can be
played back from any midway point of the scene you wish to see.
≥Operate the zoom lever or the zoom buttons to side
and change over the thumbnail display to Highlight&Time
frame index. (l42)
1Touch .
≥To display the next (previous) page:
jSlide the thumbnail display upward (downward) while
touching it.
jSwitch the Touch Menu, and then touch (up)/ (down) on the
thumbnail scroll lever.
2Touch the desired search condition.
[3 SECONDS]/[6 SECONDS]/[12 SECONDS]/[MINUTES]/[FACE]*/[HIGHLIGHT]*
* It is not displayed on iFrame scen es.
≥
When select [FACE], it will select the portion for which face recognition was performed from the
scenes judged to be clearly recorded. This will then be displayed as a thumbnail.
≥A portion judged to be clearly recorded will be detected and displayed in thumbnail if you
select [HIGHLIGHT].
Playback operation
Playback display Operating steps
Direct playback During Playback
Touch the Direct playback bar or slide
it while touching.
≥The playback pauses temporarily and
skips to the position touched or slid to
while touching.
≥Playback will start by releasing your
touching or sliding finger.
≥Direct playback bar cannot be operated
with the remote control.
2.1
M
HDCTM900&HS900P&PC-VQT3K69_mst.book 90 ページ ２０１０年１２月１６日　木曜日　午後７時８分