Panasonic HDC-TM900P/PC, HDC-HS900P/PC owner manual Highlight Playback

Highlight Playback

Part that was recognized as clearly recorded is extracted from a long recording, and it can be played back in a short time with effects and music added.

≥Highlight playback cannot be used for iFrame scenes.

1

2

Touch . (l 30)

(Only when you would like to change the settings)

Touch [SET] to select the item to change.

ALL

[SCENE SETUP]: Select the scene or date to be played back.

[PRIORITY SETUP]: Select the target to give priority to play back. (l 94)

[PLAYBACK TIME]: Select the time to play back. (l 94)

[EFFECT SETUP]: Select the effect for playback. (l 94)

[MUSIC SELECT]: Select the music to be played on playback. (l 94)

3 Touch [START].

≥When the [SCENE SETUP] is not changed in step 2, it will playback with the last recorded date.

4 Select the playback operation. (l 41, 89)

≥When the playback is finished or stopped, the screen to select [REPLAY], [SELECT AGAIN] or [EXIT] is displayed. Touch the desired item.

≥Playing back of all the scenes returns if the unit is turned off or the mode is changed.

≥Slow-motion playback, frame-by-frame playback, and direct playback bar operation are not possible.

≥Highlight playback cannot be performed with interval-recorded motion pictures. (l 68)

∫Scene setting

1Touch [SELECT SCENES] or [SELECT DATE].

2(When [SELECT SCENES] is selected)

Touch the scenes to be played back.

≥ Up to 99 scenes can be selected in succession.

≥When touched, the scene is selected and is displayed.

Touch the scene again to cancel the operation.

(When [SELECT DATE] is selected)

Touch the date to be played back.

≥A maximum of 7 days can be selected.

≥When touched, the date is selected and surrounded by red. Touch the date again to cancel the operation.

3 Touch [Enter]/[ENTER].

93

VQT3K69