4: Quick Setup

When you are done, the front panel returns to the clock display. The network port resets to the new settings, and you can connect to your IP network for further administration. You should be able to SSH to the SLC 8000 advanced console manager through your network connection, or access the Web interface through a Web browser.

Restoring Factory Defaults

To use the LCD display to restore factory default settings:

1.Press the right arrow button to move to the last option, Release.

2.Use the down arrow to move to the Restore Factory Defaults option. A prompt for the 6-digit Restore Factory Defaults password displays.

3.Press Enter to enter edit mode.

4.Using the left and right arrows to move between digits and the up and down arrows to change digits, enter the password (the default password is 999999).

Note: The Restore Factory Defaults password is only for the LCD. You can change it at the command line interface using the admin keypad password command.

5.Press Enter to exit edit mode. If the password is valid, a Save Settings? Yes/No prompt displays.

6.Select Yes and press Enter. When the process is complete, the SLC unit reboots.

Method #2 Quick Setup on the Web Page

After the unit has an IP address, you can use the Quick Setup page to configure the remaining network settings. This page displays the first time you log into the SLC 8000 advanced console manager only. Otherwise, the SLC Home page displays.

To complete the Quick Setup page:

1.Open a web browser (Firefox, Chrome or Internet Explorer web browsers with JavaScript enabled).

2.In the URL field, type https:// followed by the IP address of your SLC console manager.

Note: The web server listens for requests on the unencrypted (HTTP) port (port 80) and redirects all requests to the encrypted (HTTPS) port (port 443).

3.Log in using sysadmin as the user name and PASS as the password. The first time you log in to the SLC unit, the Quick Setup page automatically displays. Otherwise, the Home page displays.

Note: To open the Quick Setup page at another time, click the Quick Setup tab.

SLC™ 8000 Advanced Console Manager User Guide

43

Page 43
Image 43
Lantronix SLC 8000 manual Method #2 Quick Setup on the Web, Restoring Factory Defaults, To complete the Quick Setup