8: Device Ports

3. Select a port and enter or view the following information:

Dev Port

Displays the number of the SLC port.

 

 

Device Port Name

Displays the name of the SLC port.

 

 

Temp

Current temperature (degrees Celsius) on the device the sensor is monitoring.

 

 

Low Temp

Enter the temperature (degrees Celsius) permitted on the monitored device below

 

which the SLC 8000 advanced console manager sends a trap.

 

 

High Temp

Enter the temperature (degrees Celsius) permitted on the monitored device above

 

which the SLC unit sends a trap.

 

 

Use °F

Display and set the temperature for this device in degrees Fahrenheit, instead of

 

Celsius, which is the default.

 

 

Humidity (%)

Current relative humidity on the device the sensor is monitoring.

 

 

Low Humidity

Enter the relative humidity permitted on the device the sensor is monitoring below

 

which the sensor sends a trap to the SLC advanced console manager.

 

 

High Humidity

Enter the highest relative acceptable humidity permitted on the device above which

 

the sensor sends a trap to the SLC unit.

 

 

Traps

Select to indicate the SLC 8000 advanced console manager should send a trap or

 

configured Event Alert when the sensor detects an out-of-range configured

 

threshold.

 

 

4.Click the Apply button.

5.To view the status detected by the Sensorsoft, click the Sensorsoft Status link to the right of the table.

Device Port Commands

The following CLI commands correspond to the web page entries described above.

To configure a single port or a group of ports (for example, set deviceport port 2-5,6,12,15-

16 baud 2400):

set deviceport port <Device Port List or Name> <one or more device port parameters>

Parameters

auth <papchap> banner <Banner Text> baud <300-230400> breakseq <1-10 Chars>

calleridcmd <Modem Command String> calleridlogging <enabledisable> chaphost <CHAP Host or User Name> chapsecret <CHAP Secret or User Password>

The user defines the secret.

checkdsr <enabledisable> closedsr <enabledisable> databits <78>

device

<noneslp8slp16slp8exp8slp8exp16slp16exp8slp16exp16sensorsoft servertech>

dialbackeretries <1-10>

SLC™ 8000 Advanced Console Manager User Guide

115

Page 115
Image 115
Lantronix SLC 8000 manual Device Port Commands