Lantronix SLC 8000 manual Ldap Commands, Set ldap one or more parameters, Adsupport enabledisable

11: User Authentication

4. Select or clear the checkboxes for the following rights:

Full Administrative	Right to add, update, and delete all editable fields.
Networking	Right to enter Network settings.
Services	Right to enable and disable system logging, SSH and Telnet logins, SNMP, and
	SMTP.
Secure Lantronix	Right to view and manage secure Lantronix units (e.g., SLP, Spider, or SLC
Network	devices) on the local subnet.
Date/Time	Right to set the date and time.
Reboot & Shutdown	Right to shut down and reboot the SLC unit.
Local Users	Right to add or delete local users on the system.
Remote	Right to assign a remote user to a user group and assign a set of rights to the user.
Authentication
SSH Keys	Right to set SSH keys for authenticating users.
User Menus	Right to create a custom user menu for the CLI for NIS users.
Web Access	Right to access Web-Manager.
Diagnostics &	Right to obtain diagnostic information and reports about the unit.
Reports
Firmware &	Right to upgrade the firmware on the unit and save or restore a configuration (all
Configuration	settings). Selecting this option automatically selects Reboot & Shutdown.
Internal Modem	Right to configure internal modem settings.
Device Port	Right to enter device port settings.
Operations
Device Port	Right to enter device port configurations.
Configuration
USB	Right to enter modem settings for USB.
SD Card	Right to view and enter settings for SD card.

5. Click the Apply button.

Note: You must reboot the unit before your changes will take effect.

LDAP Commands

These commands for the command line interface correspond to the web page entries described above.

To configure the SLC unit to use LDAP to authenticate users who log in via the Web, SSH, Telnet, or the console port:

set ldap <one or more parameters>

Parameters

adsupport <enabledisable>

Enables or disables active directory.

base <LDAP Base> bindname <Bind Name> breakseq <1-10 Chars>

SLC™ 8000 Advanced Console Manager User Guide 194