7: Services

2. Enter the following fields:

Timeout

Select No to disable Timeout.

 

Select Yes, minutes (5-120)to enable timeout.

 

Enter the number of minutes (must be between 30 and 120 minutes) after

 

which the SLC web session times out. The default is 5.

 

Note: If a session times out, refresh the browser page and login to a new web

 

session.

 

 

Enable iGoogle Gadget

Select the check box to enable an SLC iGoogle gadget. The iGoogle gadget

Web Content

allows an iGoogle user to view the port status of many SLC units on one web

 

page. (See “iGoogle Gadgets” on page 98.)

 

 

Allow SSLv2 Protocol

Click the checkbox to support SSLv2 protocol. By default, the web supports the

 

SSLv3/TLSv1 protocol. Changing this option requires a reboot for the change to

 

take effect.

 

 

Cipher

By default, the web uses High/Medium security (128 bits or higher) for the cipher.

 

This option can be used to configure the web to also support Low security (less

 

than 128 bits) ciphers or FIPS approved ciphers (see Security.) Changing this

 

option requires a reboot for the change to take effect.

 

 

Group Access

Specify one or more groups to allow access to the web manager user interface.

 

If undefined, any group can access the web. If one or more groups are specified

 

(groups are delimited by the characters ',' (comma) or ';' (semicolon)), then any

 

user who logs into the web must be a member of one of the specified groups,

 

otherwise access will be denied. Users authenticated via RADIUS may have a

 

group (or groups) provided by the RADIUS server via the Filter-Id attribute that

 

overrides the group defined for a user on the SLC. A group provided by a remote

 

server must be either a single group or multiple groups delimited by the

 

characters ',' (comma), ';' (semicolon), or '=' (equals) - for example

 

"group=group1,group2;" or "group1,group2,group3".

 

 

Banner

Enter to replace default text displayed on the web manager home page after the

 

user logs in. May contain up to 1024 characters. Blank by default. To create

 

additional lines in the banner use the \n character sequence.

 

 

Web Sessions

Click this link to view or terminate a web session. (See “Services - Web

 

Sessions” on page 95.)

 

 

SSL Certificate

Click this link to view, import or reset the SSL Certificate. (See “Services - SSL

 

Certificate” on page 96.)

 

 

3. Click the Apply button to save.

Admin Web Commands

The following CLI commands correspond to the wegb page entries described above.

To configure the timeout for web sessions:

admin web timeout <disable5-120 minutes>

To configure the web server to use SSLv2 in addition to SSLv3 and TLSv1:

admin web protocol <sslv2nosslv2>

To configure the strength of the cipher used by the web server

(high is 256 or 128 bit, medium is 128 bit, low is 64, 56 or 40 bit): admin web cipher <himedhimedlowfips>

SLC™ 8000 Advanced Console Manager User Guide

94

Page 94
Image 94
Lantronix SLC 8000 Admin Web Commands, To configure the timeout for web sessions, Admin web timeout disable5-120 minutes