14: Command Reference

NFS and SMB/CIFS Commands

set nfs mount

Syntax

set nfs mount <one or more parameters>

Parameters

locdir <Directory> mount <enabledisable> remdir <Remote NFS Directory> rw <enabledisable>

Enables or disables read/write access to remote directory.

Description

Mounts a remote NFS share.

The remdir and locdir parameters are required, but if they have been specified previously, you do not need to provide them again.

set nfs unmount

Syntax

set nfs unmount <123>

Description

Unmounts a remote NFS share.

set cifs

Syntax

set cifs <one or more parameters>

Parameters

eth1 <enabledisable> eth2 <enabledisable> state <enabledisable> workgroup <Windows workgroup>

Description

Configures the SMB/CIFS share, which contains the system and device port logs. The admin config command saves SLC configurations on the SMB/CIFS share.

SLC™ 8000 Advanced Console Manager User Guide

312

Page 312
Image 312
Lantronix SLC 8000 manual NFS and SMB/CIFS Commands, Set nfs mount, Set nfs unmount, Set cifs