Lantronix SLC 8000 manual To view or update a site, To delete a site, To create or edit a site

	8: Device Ports
Modem Timeout	Timeout for dial-in and dial-on-demand PPP connections. Select Yes (default) for
	the SLC 8000 advanced console manager to terminate the connection if no traffic
	is received during the configured idle time. Enter a value of from 1 to 9999
	seconds. The default is 30 seconds.
Restart Delay	The number of seconds after the modem timeout and before the SLC unit
	attempts another connection. The default is 30 seconds.
CBCP Server	For a CBCP Server site, allows "No Callback" as an option in the CBCP
Allow No Callback	handshake in addition to User-defined Number and Admin-defined Number.
Enable NAT	Select to enable Network Address Translation (NAT) for PPP connections.
	Note: IP forwarding must be enabled on the Network - Settings page for NAT to
	work.

3. Click the Add Site button.

To view or update a site:

1.In the Sites table, select the site and click the View Site button. The site attributes are displayed in the bottom half of the page.

2.Update any of the site attributes.

3.Click the Edit Site button.

To delete a site:

1.Select the site in the Sites table.

2.Click the Delete Site button.

Configures a set of site-oriented modem parameters that can be activated by various modem- related events (authentication, outbound network traffic for DOD connections, etc.).

The site parameters will override any parameters configuredfor the modem.

Uses sites with a modem, enable 'usesites'. Sites can be used with the following modem states: dialin, dialback, cbcpserver, dialondemand, dialin+ondemand, and dialback+ondemand.

To create or edit a site:

set site addedit <Site Name> [<parameters>]

Parameters

name <Site Name> (edit only)

deviceport <Device Port # or Name or none> usbport <U1U2>

internal modem auth <papchap>

loginhost <User Login/CHAP Host> chapsecret <CHAP Secret> localipaddr <negotiateIP Address> remoteipaddr <negotiateIP Address> routeipaddr <IP Address> routemask <Mask>

routegateway <Gateway> nat <enabledisable> dialoutnumber <Phone Number>

SLC™ 8000 Advanced Console Manager User Guide 151