Lantronix SLC 8000 manual System Log Command, To clear system logs, Ending at

12: Maintenance

Ending at

Select the endpoint of the range you want to view:

End of Log: to view the log from the latest available ending time and date.

Date: to view the log up to the last available log ending date and time.

3.Click the View Log button. Your specified system log displays. For example, if you select the type All and the level Error, the SLC unit displays a log similar to this:

Figure 12-4 System Logs

From a queried system log (e.g., Figure 12-4), you may email this information to a specific individual or to Lantronix Technical Support. See Emailing Logs and Reports (on page 246).

To clear system logs:

1.From the Maintenance > System Logs page, select Maintenance - System Logs.

2.Click the Clear Log button to clear all log information.

System Log Command

The following command for the command line interface corresponds to the web page entries described above.

To view the system logs containing information and error messages:

show syslog [<parameters>]

SLC™ 8000 Advanced Console Manager User Guide 236