Nortel Networks 2500 Series Show cli command, Terminal command is executed in the User Exec mode

194System configuration using the CLI

terminal speed {2400480096001920038400}length <1-132>width <1-132>

The terminal command is executed in the User Exec mode.

Table 58 "terminal command parameters and variables" (page

194)describes the parameters and variables for the terminal command.

Table 58

terminal command parameters and variables

Parameters and	Description
variables
speed	Sets the transmit and receive baud rates for the terminal.
{240048009600192	You can set the speed at one of the five options shown;
0038400}	default is 9600.
length	Sets the length of the terminal display in characters;
	default is 24.
width	Sets the width of the terminal displaying characters;
	default 79.

show cli command

The show cli command displays the current CLI settings. The syntax for the show cli command is:

show cli {info mode password [type]}

The show cli command is executed in the User Exec command mode.

Table 59 "show cli command parameters and variables" (page

194)describes the parameters and variables for the show cli command.

Table 59

show cli command parameters and variables

Parameters and	Description
variables
info	Displays general Console settings.
mode	Displays CLI mode.
password	Displays CLI user names and passwords.
type	Displays password types.

Figure 64 "show cli command output" (page 195) displays the output from the show cli command.

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks