Nortel Networks 2500 Series manual No name command, Default name command

236Ethernet port management using the CLI

Parameters and variables

Description

ATTENTION

If you omit this parameter, the system uses the port number you specified in the interface command.

<LINE>

Enter up to 26 alphanumeric characters.

no name command

The no name command clears the port names; it resets the field to an empty string. The syntax for the no name command is:

no name [port <portlist>]

The no name command is executed in the Interface Configuration command mode.

Table 94 "no name command parameters and variables" (page

236)describes the parameters and variables for the no name command.

Table 94

no name command parameters and variables

Parameters and	Description
variables
port <portlist>	Specifies the port numbers to clear of names.

ATTENTION

If you omit this parameter, the system uses the port number you specified in the interface command.

default name command

The default name command clears the port names; it resets the field to an empty string. The syntax for the default name command is:

default name [port <portlist>]

The default name command is executed in the Interface Configuration command mode.

Table 95 "default name command parameters and variables" (page

237)describes the parameters and variables for the default name command.

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks