Nortel Networks 2500 Series manual No ip name-server command, Ip domain-name command

Using DNS to ping and telnet 187

Table 53 "ip name-server command parameters and variables" (page

187)describes the parameters and variables for the ip name-server command.

Table 53

ip name-server command parameters and variables

Parameters and	Description
variables
<A.B.C.D>	Enter the IP address of a DNS server.

The default value is 0.0.0.0.

no ip name-server command

The no ip name-servercommand removes one or more DNS servers’ IP addresses. The syntax for the no ip name-servercommand is:

no ip name-server <A.B.C.D>

The no ip name-servercommand is executed in the Global Configuration command mode.

Table 54 "no ip name-server command parameters and variables" (page

187)describes the parameters and variables for the no ip name-server command.

Table 54

no ip name-server command parameters and variables

Parameters and	Description
variables
<A.B.C.D>	Enter the IP address of a DNS server.

The default value is 0.0.0.0.

ip domain-name command

The ip domain-namecommand sets the system’s DNS domain name. The syntax for the ip domain-namecommand is:

ip domain-name [<LINE>]

The ip domain-namecommand is executed in the Global Configuration command mode.

Table 55 "ip domain-name command parameters and variables" (page

188)describes the parameters and variables for the ip domain-name command.

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks