Nortel Networks 2500 Series manual Ascii config file, Field Description

		Working with configuration files 273
Field	Description
ImageFileName	Name of the image file(s) currently associated with the
	interface. When the object is not used, the value is a zero
	length string.
FwFileName	Specifies the FWFileName.
(Diagnostics)
Action	• This object is used to download or upload a config file,
		an image file or diag firmware file. In read operation, if
		there is no action taken since the boot up, it returns with
		a value of other. Otherwise, it returns the latest action.
	• In a write operation, the values that can be written are:
		dnldConfig
		dnldImg
		upIdConfig
		dnldFw
		dnldImgIfNewer
		dnldImgNoReset
		dnldFwNoReset
	• The newly downloaded config, image or diag file cannot
		take effect until the next boot cycle of the device.
Status	This object is used to get the status of the latest action as
	shown by s5AgInfoFileAction. The values that can be read
	are:
	• other—if no action taken since the boot up
	• inProgress—the operation is in progress
	•	success—the operation succeeds
	•	fail—the operation failed

ASCII config file

To display the ASCII Config file tab, use the following procedure:

→In the File System dialog box, click on the ASCII Config File tab. The ASCII Config File tab appears.

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks