Nortel Networks 2500 Series manual Saving the configuration to Nvram, Copy config nvram command

Saving the configuration to NVRAM 205

Figure 71

show interfaces config command output

Saving the configuration to NVRAM

You can save your configuration parameters to Non-Volatile RAM (NVRAM) using any of the following CLI commands:

•"copy config nvram command" (page 205)

•"write memory command" (page 205)

•"save config command" (page 206)

copy config nvram command

The copy config nvram command copies the current configuration to NVRAM. The syntax for the copy config nvram command is:

copy config nvram

The copy config nvram command is executed in the Privileged EXEC command mode.

The copy config nvram command has no parameters or variables.

ATTENTION

The system automatically issues the copy config nvram command periodically. See "Enabling and disabling autosave" (page 206) for details.

write memory command

The write memory command copies the current configuration to NVRAM. The syntax for the write memory command is:

write memory

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks