Nortel Networks 2500 Series manual No clock summer-time, Show clock time-zone

214System configuration using the CLI

The clock summer-timecommand is executed in the Global

Configuration command mode.

Table 75 "clock summer-time command parameters and variables" (page

214)describes the parameters and variables for the clock summer-timecommand.

Table 75

clock summer-time command parameters and variables

Parameters and	Description
variables
zone	The acronym to display when summer time is in effect. If
	unspecified default to the time zone acronym. (Range: up
	to 4 characters)
date {<day>	The first date specifies when summer time should start
<month> <year>
	and the second date specifies when summer time
<hh:mm>} {<day>
	should end.
<month> <year>
	• day: day of the month (Range: 1 to 31)
<hh:mm>}
	• month: month (Range: first three letters by name)
	• hh:mm: time in military format, in hours and minutes

	ATTENTION
	<day> <month> parameters can also be entered in
	order: <month> <day>.
offset	Number of minutes to add during summer time (Range:
	-840 to 840).

no clock summer-time

The no clock summer-timecommand disables the daylight savings time feature. The syntax for the no clock summer-timecommand is:

no clock summer-time

The no clock summer-timecommand is executed in the Global

Configuration command mode.

The no clock time-zonecommand has no parameters or variables.

show clock time-zone

The show clock time-zonecommand displays the local time zone settings. The syntax for the show clock time-zonecommand is:

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks