Nortel Networks 2500 Series manual Show rate-limit command, Rate-limit command

Enabling rate-limiting 243

This section contains information about the following:

•"show rate-limit command" (page 243)

•"rate-limit command" (page 243)

•"no rate-limit command" (page 244)

•"default rate-limit command" (page 244)

show rate-limit command

The show rate-limitcommand displays the rate-limiting settings and statistics. The syntax for the show rate-limitcommand is:

show rate-limit

The show rate-limitcommand is executed in the Privileged EXEC command mode.

The show rate-limitcommand has no parameters or variables.

Figure 88 "show rate-limit command output" (page 243) displays sample output from the show rate-limit command.

Figure 88

show rate-limit command output

rate-limit command

The rate-limitcommand configures rate-limiting on the switch.

The syntax for the rate-limitcommand is:

rate-limit [multicast broadcast both] <0-262143>

The rate-limitcommand is executed in the Global Configuration command mode.

Table 103 "rate-limit command parameters and variables" (page

244)describes the parameters and variables for the rate-limit command.

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks