Nortel Networks 2500 Series manual Quick Start

Quick Start 313

•SNMP Write community

•SNMP Trap IP addresses and communities (up to four)

•New default VLAN

During the initial setup mode, all ports are assigned to the new default VLAN.

A port-based Quick Start VLAN is created if the new default VLAN does not exist. All ports are removed from the current default VLAN and assigned to the Quick Start VLAN. The PVIDs for all ports are changed to the Quick Start VLAN. The Quick Start VLAN is also designated as the management VLAN.

To configure the initial settings using the Quick Start feature:

Step Action

1From the main menu, select Administration > Quick Start. The Quick Start page is displayed.

Figure 113 Quick Start page

2Click on the Submit button after making the required settings. The following table describes the items on the Quick Start page.

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks