Nortel Networks 2500 Series manual No tftp-server command, Default tftp-server command

Customizing your system 199

no tftp-server command

The no tftp-servercommand clears the TFTP server IP address to 0.0.0.0. The syntax of the no tftp-servercommand is:

no tftp-server

The no tftp-servercommand is executed in the Global Configuration command mode.

The no tftp-servercommand has no parameters or values.

default tftp-server command

The default tftp-servercommand sets the TFTP server IP address to 0.0.0.0. The syntax of the default tftp-servercommand is:

default tftp-server

The default tftp-servercommand is executed in the Global Configuration command mode.

The default tftp-servercommand has no parameters or values.

copy config tftp command

The copy config tftp command copies the current configuration file onto the TFTP server. The syntax for the copy config tftp command is:

copy config tftp [address <XXX.XXX.XXX.XXX>] filename <WORD>

The copy config tftp command is executed in the Privileged EXEC command mode.

Table 63 "copy config tftp command parameters and variables" (page

199)describes the parameters and variables for the copy config tftp command.

Table 63

copy config tftp command parameters and variables

Parameters and	Description
variables
address <XXX.XXX.X	Specifies the TFTP server IP address; enter in
XX.XXX>	dotted-decimal notation.
filename <WORD>	Specifies filename that you want to copy the
	configuration file onto the TFTP server. Enter the name
	you want the configuration file to have on the TFTP
	server.

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks