Nortel Networks 2500 Series Copy running-config tftp command, Show running-config command output

192System configuration using the CLI

show running-config

Figure 62 "show running-config command output" (page 192) shows the output of the show running-config command

Figure 62

show running-config command output

copy running-config tftp command

This command copies contents of the current configuration file to another file on the TFTP server. The syntax of the command is

copy running-config tftp {<address> <filename>}

This command can be executed in the Global Configuration command mode.

Table 57 "copy running-config tftp command parameters and variables" (page 192) describes the parameters and variables of this command.

Table 57

copy running-config tftp command parameters and variables

Parameter	Description
address	Signifies the IP address of the TFTP server.
filename	Denotes the filename to store configuration commands
	on the TFTP server.

ATTENTION

Use the copy running-config tftp command only from the base unit in a stack.

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks