Nortel Networks 2500 Series Show interfaces config command, Show interfaces verbose command output

204System configuration using the CLI

The following figure shows a sample output of the show interfaces verbose command.

Figure 70

show interfaces verbose command output

show interfaces config command

The show interfaces config command displays the current operational status of interfaces and provides supplementary information about the current port settings for Spanning Tree Protocol.

The syntax for the show interfaces config command is:

show interfaces [<portlist>] config

The show interfaces config command is executed in the Privileged EXEC command mode.

Table 68 "show interfaces config command parameters and variables" (page 204) describes the parameters and variables for the show interfaces config command.

Table 68

show interfaces config command parameters and variables

Parameters
and	Description
variables
<portlist>	Enter the ports you want to display.

Figure 71 "show interfaces config command output" (page 205) displays a sample output of the show interfaces config command.

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks