Nortel Networks 2500 Series manual Show lldp port command, Show lldp stats command output

226System configuration using the CLI

Figure 80

show lldp stats command output

show lldp port command

The show lldp port command displays configuration data for LLDP ports. The syntax for the show lldp port command is:

show lldp [port <portlist>] [neighbor] [neighbor-mgmt-addr] [rx-stats] [tx-stats] [tx-tlv]

The show lldp port command is executed in the User Exec command mode.

Table 88 "show lldp port command parameters and variables" (page

226)describes the parameters and variables for the show lldp port command.

Table 88

show lldp port command parameters and variables

Parameters and	Description
variables
port <portlist>	Specifies the ports affected by the command.
neighbor	Displays LLDP neighbors.
neighbor-mgmt-addr	Displays LLDP management addresses for neighbors.
rx-stats	Displays LLDP receive statistics.
tx-stats	Displays LLDP transmit statistics.
tx-tlv	Displays LLDP transmit TLVs.

Figure 81 "show lldp port neighbor command output" (page 227) displays the output from the show lldp port neighbor command.

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks