Nortel Networks 2500 Series manual End

		Configuring PoE using web-based management 169
Item	Description
DTE Power	Displays total power use on all devices currently drawing power.
Consumption
DTE Power	Enter the percentage of total power consumption on the switch necessary to
Usage Threshold	trigger a trap.
	The default value is 80%.
Power Pair	Displays the power pair of the RJ-45 pin connectors that supplies the power.
	The only available option for the Ethernet Routing Switch 2500 Seris is Signal.
		ATTENTION
		Ensure that the power pair used by the IP devices you are powering
		matches the power pair for the Ethernet Routing Switch 2500 Series.
Traps Control	Choose to enable or disable trap from agent.
PD Detect Type	Choose the type of power detection you want for the switch:
	•	802.3af
	•	802.3af and legacy
	The default is 802.3af.

	ATTENTION
	Ensure that the power detection method you choose for the Ethernet
	Routing Switch 2500 Series matches that used by the IP devices you are
	powering.
Power Source	This display-only field displays the current power supply for the switch:
Present
	• AC Only--using only the internal power source of the switch
AC Power Status	Displays the current status of AC power on the switch.
DC Power Status	Displays the current status of DC power on the switch (Not Present).

2Type the information, or make a selection from the list.

3Click Submit.

—End—

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks