Nortel Networks 2500 Series manual Autotopology command, No autotopology command

216System configuration using the CLI

•"default autotopology command" (page 216)

autotopology command

The autotopology command enables the Autotopology protocol. The syntax for the autotopology command is:

autotopology

The autotopology command is executed in the Global Configuration command mode.

The autotopology command has no parameters or values.

no autotopology command

The no autotopology command disables the Autotopology protocol. The syntax for the no autotopology command is:

no autotopology

The no autotopology command is executed in the Global Configuration command mode.

The no autotopology command has no parameters or values.

default autotopology command

The default autotopology command enables the Autotopology protocol. The syntax for the default autotopology command is:

default autotopology

The default autotopology command is executed in the Global

Configuration command mode.

The default autotopology command has no parameters or values.

show autotopology settings

The show autotopology settings command displays information on the Autotopology configuration. The syntax for the

show autotopology settings command is:

show autotopology settings

The show autotopology settings command is executed in the

Privileged EXEC command mode.

The show autotopology settings command has no parameters or variables.

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks