Manuals / Nortel Networks / Computer Equipment / Switch

Nortel Networks 2500 Series manual Interface tab for a single port

Models: 2500 Series

1 392

Page 304

304Conﬁguring ports using Device Manager

The following sections provide a description of the Edit Port dialog box, and details about the ﬁelds in the Interface tab:

•"Interface tab for a single port" (page 304)

•"Interface tab for multiple ports" (page 308)

Interface tab for a single port

The Interface tab shows the basic conﬁguration and status of a single port. To view the Interface tab, use the following procedure:

Step Action

1Select the port you want to edit.

2Do one of the following:

•Double-click on the selected port.

•From the Device Manager main menu, choose Edit > Port.

•From the shortcut menu, choose Edit.

•From the toolbar, click Edit.

The Port dialog box for a single port appears with the Interface tab displayed.

Nortel Ethernet Routing Switch 2500 Series

Overview — System Conﬁguration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Page 304

Image 304

Nortel Networks 2500 Series manual Interface tab for a single port

Contents

Overview System Conﬁguration Restricted rights legend TrademarksStatement of conditions Nortel Networks software license agreement GeneralPage Contents System conﬁguration software features Getting Started with Device Manager 101 Using the Web-based management interface 145 System conﬁguration using the CLI 177 Copyright 2007, Nortel Networks Ethernet port management using the CLI 233 Conﬁguring ports using Device Manager 303 Troubleshooting 337 Contents Features Conﬁguring daylight savings time using the device managerNew in this release Other changesNew in this release Introduction Before you beginText conventions This guide uses the following text conventionsIntroduction Bold body textRelated publications Protocols menuHow to get help Getting help over the phone from a Nortel Solutions CenterGetting help from the Nortel web site Getting help through a Nortel distributor or resellerHow to get help Introduction Ethernet Routing Switch 2500 Series hardware Front panelEthernet Routing Switch 2550T-PWR Ethernet Routing Switch 2526T front panelConsole port Port connectors SFP Gbic Support on the Ethernet Routing Switch 2500 SeriesGigabit Interface Converter Auto-MDI/MDI-X LED display panelPWR Kensington lock Back panelLabel Type Color State Meaning AC power receptacle Cooling fansRead immediately Country/Plug Specifications Typical plug DescriptionBitte sofort lesen Leggere attentamente Lisez ceci immédiatementSírvase leer inmediatamente Avertissement Small ofﬁce desktop switch application Network conﬁguration examplesBranch ofﬁce workgroup switch application Ethernet Routing Switch 2500 Series used as a desktop switchMedium sized ofﬁce wiring closet switch application Conﬁguring power workgroups and a wiring closet switchConﬁguring power workgroups and a wiring closet switch Ethernet Routing Switch 2500 Series hardware Nortel Ethernet Routing Switch 2500 Series stacking Stacking capabilitiesStacking functionality delivery Stack enabled switchesStandalone conﬁguration with license ﬁles Working with license ﬁles using the CLI Syntax for the copy tftp license command isCopying the license ﬁle using the Java Device Manager Show license all command outputStep Action License Download Following table describes the ﬁelds on the License DownloadLicense Download page ﬁelds Fields Description To set up a stack, do the following Stack conﬁgurationConﬁguring the operational mode on rear ports using the CLI Rear-ports mode commandShow rear-ports mode command Rear-ports mode command Show rear-ports mode commandUnit Select switch Show rear-ports mode command outputRear ports and stacking Rear panel componentsCascade Down port Connecting stack cablesCascade Up port Initial stack installation Stack MAC addressStack conﬁgurations Base Unit Cascade Cable Cascade Cable used for returnCascade down stack conﬁguration Regardless of stack conﬁguration, the following applies Temporary base unitCascade up stack conﬁguration Redundant cascade stacking Adding/Replacing a stack unit Removing a stack unitRedundant cascade stacking Auto Unit Replacement AUR function CFG mirror image process CFG mirror process in stackCFG mirror images in the stack after adding unit CFG mirror images after removing unit Restoring a CFG image CFG mirror images in the stack after removing the BU unitStep Action Conﬁguring AUR using the CLI Show stack auto-unit-replacement commandSyntax for this command is Synchronizing the CFG mirror images with CFG imagesNo stack auto-unit-replacement enable command Stack auto-unit-replacement enable commandDefault stack auto-unit-replacement enable command Conﬁguring AUR using Device Manager Displaying unit stack uptimeNortel Ethernet Routing Switch 2500 Series stacking Switch management features System conﬁguration software featuresConﬁguration and switch management Console port settings Switch bannerUser name and password Login bannerLogin screen LoggingAutosave feature Using SntpUsing DNS to ping and Telnet Setting local time zoneConﬁguring with CLI BootP automatic IP conﬁguration/MAC address Choosing a BootP request modeBootP or Default IP BootP AlwaysBootP or Last Address BootP or Default IP BootP Always BootP or Last AddressBootP Disabled BootP or Last AddressDefault BootP setting Flash memory storage Switch software image storageRequirements Conﬁguration File Download/UploadBinary conﬁguration ﬁle Ascii conﬁguration ﬁle Autotopology Link Layer Discovery Protocol Ieee 802.1abConnectivity and management information Lldp operational modesHow Lldp works System conﬁguration software features Ethernet port management features Conﬁguring Lldp using the CLIAutosensing and autonegotiation Custom Autonegotiation AdvertisementsSymmetric mode High speed ﬂow controlOther features Asymmetric modeRate Limiting Conﬁguration RFCsStandards CLI Basics CLI command modes Command mode prompts and entrance/exit commands CLI command mode hierarchyInterface FastEthern Port numbering in Standalone Mode Port numberingEthernet Routing Switch 2500 Series banner Accessing CLIPress Ctrl+Y, and the CLI prompt appears Getting help Setting the system username and passwordBasic navigation End command Exit command Reload command Shutdown command General navigation commandsKeystroke navigation Help command No command Default commandLogout command Help command outputEnable command Conﬁgure commandInterface command Conﬁgure command parameters and variablesDisable command End commandExit command Syntax for the end command isReload command Exit command has no parameters or variablesShutdown command Shutdown command parameters and variables Show sys-info command Show sys-info command Show tech commandManaging basic system information Parameters Description VariablesShow sys-info command output Show tech commandShow tech command output Show mac-address-table command Managing MAC address forwarding database tableDefault mac-address-table aging-time command Mac-address-table aging-time commandShow mac-address-table command output CLI Basics Installing Device Manager Device Manager basics Installing Device ManagerGetting Started with Device Manager JDM installation precautions Installing the Device Manager softwareInstalling JDM on Windows Installing JDM on Windows Installing JDM on Unix or LinuxWindows minimum requirements Removing previous versions of JDM on WindowsInstalling JDM on Windows from the web Installing JDM on Windows from the CDTo access the JDM software from the installation CD Executing the JDM installation software on Windows InstallAnywhere Introduction dialog boxClick Next Choose Install Set dialog boxLicense Agreement dialog box Feature Sets dialog box Click Next Choose Shortcut Folder dialog box appears Choose Install Folder dialog boxChoose Shortcut Folder dialog box Pre-Installation Summary dialog box Installing JDM on Unix or Linux Install Complete dialog boxInstalling JDM on Linux from the CD Installing JDM on Solaris from the CDMinimum requirements Installing JDM on Unix or Linux from the web Executing the JDM installation software on Unix or Linux Click Next Choose Install Set dialog box appears Do one of the followingFeature Sets dialog box Pre-Installation Summary dialog box appears Installing Java Device Manager dialog box Removing JDM in Unix or Linux environments Device Manager basics Starting Device ManagerSetting the Device Manager properties Device Manager windowDefault Properties dialog box Type information and select check boxes Click OKFollowing table describes the Properties dialog box ﬁelds Properties dialog box ﬁelds AreaArea Field Description PollingWeb Management Application ControlTo display the device view, use the following procedure Opening a deviceApplication Launch Telnet From JDMPress Ctrl+O Open Device dialog box appears Following table describes the Open Device dialog box ﬁeldsClick Open Field Description SNMPv3Device view Device Manager windowParts of the Device Manager window Use the menu bar to set up and operate the Device Manager Menu bar commands page 127 describes the Menu Bar commandsMenu bar ToolbarSelecting objects Device viewToolbar buttons Button Name Description Menu bar equivalent Selecting a single object Selecting multiple objectsViewing information about a Gbic port To select a single objectLEDs and ports Interface tabSwitch unit shortcut menu Shortcut menusPort color codes Color Description Color port legendPort shortcut menu commands Command Description Switch unit shortcut menu command Command DescriptionPort shortcut menu Using the buttons in Device Manager dialog boxes Editing objectsStatus bar Device Manager buttons Button Name DescriptionTypes of statistics Working with statistics and graphsTypes of statistics Statistic Description Statistic Description Types of graphsLine graph Area graph Bar graph Pie graph Statistics for single and multiple objectsInterface statistics for a single port Types of statistics Viewing statistics as graphs Viewing statistics as graphsInterface statistics for multiple ports Statistics dialog box for a port Opening an SSH connection to the device Telnet sessionGraph dialog box buttons Button Name Description Opening the web-based management home Trap log Web-based management homeHelp ﬁle locations Platform Default path Online HelpGetting Started with Device Manager Using the Web-based management interface RequirementsLogging in to the web-based management interface Web-based management interface homeMenu MenuMain headings and options Main menu titles Option Main menu titles Option AdacManagement Menu icons Button or icon DescriptionConsole To view stack information Viewing stack informationIcons Name Description Stack Information Stack Information screen ﬁelds Section Fields DescriptionSwitch Information Switch Information page ﬁelds DescriptionViewing summary information Section Fields DescriptionTo view or renumber devices within the stack framework Changing stack numberingStack Numbering Identifying unit numbers Stack Numbering screen ﬁelds Field Range DescriptionIdentifying Unit Numbers 157 Diagnosing and correcting PoE problems Conﬁguring PoE switch parameters using the CLIPoe poe-pd-detect-type command Status codes on PoE portsPoe poe-power-usage-threshold command LegacyConﬁguring PoE port parameters using the CLI Poe poe-trap commandNo poe-trap command No poe-shutdown commandPoe poe-shutdown command No poe-shutdown commandNo poe-shutdown command parameters and variables Poe poe-priority command Poe poe-shutdown command parameters and variablesSyntax for the poe poe-prioritycommand is Poe poe-priority command parameters and variablesPoe poe-limit command parameters and variables Poe poe-limit commandSets the port priority as Displaying PoE conﬁguration using the CLI Show poe-main-status commandShow poe-port-status command Show poe-port-status command parameters and variablesShow poe-power-measurement command Show poe-port-status command outputEnter the ports for which you want to display StatusConﬁguring PoE using web-based management Displaying and conﬁguring power management for the switchPower measurements Show poe-power-measurement command outputDisplaying and conﬁguring power management for the switch Displaying and conﬁguring power management for the portsGlobal Power Management Global Power Management page items DescriptionEnd Displaying and conﬁguring power management for the ports Port Property page appears Port PropertyFollowing table describes the items on the Port Property Port PropertyDescription PoE tab for a single unit Edit Unit dialog box-PoE tab for a single unit PoE tab items for a single unit DescriptionDevice Manager display for PoE ports ERS 2550T-PWR with PoE portsColor Description PoE tab for portsEdit Port dialog box- PoE tab PoE tab items page 176 describes the PoE tab items PoE tab itemsPoE tab items Description System conﬁguration using the CLI IP notationIp address command parameters and variables Ip address commandAssigning and clearing IP addresses Default ip address command No ip address commandDefault ip netmask command No ip netmask commandNo ip default-gateway command Ip default-gateway commandIp default-gateway command parameters and variables Default ip default-gateway command Show ip commandShow ip address command Show ip address command parameters and variablesShow ip command output Show ip address command outputPing command is executed in the User Exec command mode Ping commandPinging Resetting the switch to default conﬁguration Using DNS to ping and telnetShow ip dns command Ping command Ip name-server command Ping command responsesShow ip dns command Show ip dns command outputIp name-server command There is no default value for this commandNo ip name-server command Ip domain-name commandIp name-server command parameters and variables No ip name-server command parameters and variablesNo ip domain-name command Default ip domain-name commandConﬁgure network command Conﬁguration ManagementConﬁgure network command Show conﬁg-network commandConfigure network command is executed in the User Exec mode Conﬁgure network command parameters and variablesShow conﬁg-network command Show running-conﬁg command Show running-conﬁg command Copy running-conﬁg tftp commandShow conﬁg-network command output Ascii Conﬁguration GeneratorCopy running-conﬁg tftp command Show running-conﬁg command outputSetting the terminal Show terminal commandTerminal command Show terminal command Terminal commandShow cli command Terminal command is executed in the User Exec modeTerminal command parameters and variables Show cli command is executed in the User Exec command modeShow cli command output Syntax for the show sys-infocommand isDisplaying system information Setting boot parameters Boot commandIp bootp server command Ip bootp server command parameters and variablesDefault ip bootp server command No ip bootp server commandSetting Tftp parameters Show tftp-server command Tftp-server commandCopy conﬁg tftp command Copy tftp conﬁg command Tftp-server command parameters and variablesNo tftp-server command Default tftp-server commandCopy conﬁg tftp command Copy conﬁg tftp command parameters and variablesCopy tftp conﬁg command parameters and variables Copy tftp conﬁg commandCustomizing the opening banner Banner command for displaying banner Show banner commandShow banner command parameters and variables Describes the parameters for the banner commandNo banner command Show interfaces commandShow interfaces command Show interfaces conﬁg command Displaying the ARP tableShow interfaces names command output Show interfaces command parameters and variablesShow interfaces command output Show interfaces conﬁg command Show interfaces verbose command outputCopy conﬁg nvram command Write memory commandShow interfaces conﬁg command output Saving the conﬁguration to NvramShow autosave command Save conﬁg commandEnabling and disabling autosave Autosave enable command No autosave enable commandDefault autosave enable command Show autosave command has no parameters or variablesShow sntp command Sntp enable command No sntp enable commandSntp server primary address command Show sntp command outputSntp server secondary address command No sntp server commandDefault is No sntp server command parameters and variablesSntp sync-now command Sntp sync-interval commandSyntax for the sntp sync-nowcommand is Sntp sync-interval command parameters and variablesSetting local time zone Default sntp commandDefault sntp command parameters and variables Clock time-zone No clock time-zone Clock summer-timeClock time-zone command parameters and variables Clock time-zoneNo clock time-zone Clock summer-timeNo clock summer-time Clock summer-time command parameters and variablesShow clock time-zone Autotopology command No autotopology command Enabling AutopologyShow clock summer-time Show clock time-zone outputAutotopology command No autotopology commandDefault autotopology command Show autotopology settingsConﬁguring Lldp using the CLI Show autotopology settings command outputShow autotopology nmm-table command output Show autotopology nmm-tableLldp command 32768Default lldp command Lldp conﬁg-notiﬁcation commandDefault lldp command parameters and variables Lldp conﬁg-notiﬁcation command parameters and variablesDefault lldp conﬁg-notiﬁcation command No lldp conﬁg-notiﬁcation commandSpecifies the ports affected by the command Lldp tx-tlv command No lldp tx-tlv commandLldp tx-tlv command parameters and variables No lldp tx-tlv command parameters and variablesLldp status command Default lldp tx-tlv commandDefault lldp tx-tlv command parameters and variables No lldp status command Default lldp status commandLldp status command parameters and variables No lldp status command parameters and variablesShow lldp command Default lldp status command parameters and variablesShow lldp command is executed in the User Exec command mode Show lldp command parameters and variablesShow lldp local-sys-data command output Show lldp mgmt-sys-data command outputShow lldp port command parameters and variables Show lldp port commandShow lldp stats command output Show lldp port neighbor command output Show lldp port neighbor-mgmt-addr command outputShow lldp port rx-stats command output Show lldp port tx-stats command outputConﬁguring LEDs to blink on the display panel Show lldp port tx-tlv command outputUpgrading software Download command Download commandSyntax for the download command is Download command parameters and variablesDownload message System conﬁguration using the CLI Ethernet port management using Shutdown command for the portShutdown command for the port No shutdown command Shutdown port command parameters and variablesNo shutdown command parameters and variables No shutdown commandShutdown port command output Name command No name command Default name command Name commandNaming ports No name command Default name commandNo name command parameters and variables Default name command parameters and variablesSetting port speed Speed commandDefault speed command Default speed command parameters and variablesDuplex command Default duplex commandﬂowcontrol command Default duplex command parameters and variablesﬂowcontrol command parameters and variables Enabling ﬂow controlNo ﬂowcontrol command No ﬂowcontrol command parameters and variablesDefault ﬂowconrtol command parameters and variables Default ﬂowcontrol commandEnabling rate-limiting Show rate-limit command Rate-limit commandRate-limit command parameters and variables Show rate-limit command outputDefault rate-limit command No rate-limit commandEnabling Custom Autonegotiation Advertisements Cana Show auto-negotiation-advertisements command Show auto-negotiation-capabilities commandShow auto-negotiation-advertisements command output Enter ports for which you want the currentAuto-negotiation-advertisements command No auto-negotiation-advertisements command Default auto-negotiation-advertisements commandEnter ports for which you want to set default Conﬁguring the switch using Device Manager Viewing Unit informationTo open the Rate Limit tab, use the following procedure Unit tabRate Limit tab To open the Unit tabRate Limit tab Following table describes the Rate Limit tab ﬁeldsRate Limit tab ﬁelds Field Description Rear Ports Mode tab Following table describes the Rear Port Mode tab itemsRearPortOperMode Viewing switch IP information To open the Globals tab, use the following procedureGlobals tab Following table describes the Globals tab ﬁeldsAddresses tab Following table describes the Address tab ﬁeldsGlobals tab ﬁelds Field and MIB Description Association Edit IP dialog box IP Address tabARP tab Following table describes the ARP tab ﬁeldsEdit IP dialog box ARP tab ARP tab ﬁelds Field DescriptionTCP tab Following table describes the TCP tab ﬁeldsTCP tab TCP tab ﬁelds Field DescriptionUDP Listeners tab TCP Connections tabTCP Connections tab ﬁelds Field Description Editing the chassis conﬁguration UDP Listeners tab ﬁelds Field DescriptionSystem tab Edit Chassis dialog box System tabFollowing table describes the System tab ﬁelds System tab ﬁelds Field DescriptionBase Unit Info tab Following table describes the Base Unit Info tab ﬁelds Base Unit Info tab ﬁelds Field DescriptionValue is 4th flr wiring closet in blg a Stack Info tabEdit Chassis screen-Stack Info tab Stack Info tab ﬁelds Field Description264 Conﬁguring the switch using Device Manager Agent tab Edit Chassis dialog box Agent tab Following table describes the Agent tab ﬁeldsAgent tab ﬁelds Field Description PowerSupply tab Following table describes the PowerSupply tab ﬁeldsEdit Chassis dialog box PowerSupply tab Power Supply tab ﬁelds Field DescriptionFollowing table describes the Fan tab ﬁelds Fan tabEdit Chassis dialog box Fan tab Banner tab Edit Chassis dialog box Banner tabTo set the default banner, use the following procedure To disable the bannerTo check that the banner is disabled Telnet window with default bannerCustom Banner tab To create a Custom Banner, use the following procedureEdit Chassis dialog box Custom Banner tab Working with conﬁguration ﬁles FileSystem dialog boxFileSystem Conﬁg/Image/Diag ﬁle dialog box ﬁelds FileSystem Conﬁg/Image/Diag File tab dialog boxAscii conﬁg ﬁle File system Ascii Conﬁg File dialog box Save Conﬁguration tabAscii Conﬁg File tab ﬁelds Field Description Save Conﬁg tab Following table describes the Save Conﬁguration tab ﬁeldsSave Conﬁguration tab ﬁelds Field Description Conﬁguring Sntp Working with SntpSNTPClock dialog box Following table describes the Sntp dialog box ﬁelds SNTPClock dialog box ﬁelds Field DescriptionConﬁguring local time zone using the device manager Conﬁguring daylight savings time using the device managerDisplaying topology information using Device Manager To view topology information, use the following procedureTopology tab Topology tab Topology Table tabTopology Table tab Diagnostics dialog box Topology tabTopology tab ﬁelds Field Description Conﬁguring Lldp using Device Manager Diagnostics dialog box Topology Table tabFollowing table describes the Topology Table tab ﬁelds Lldp Globals tabLldp dialog box appears with the Globals tab displayed Lldp Globals tabLldp Globals tab Lldp Globals tab ﬁelds Field Description 284 Conﬁguring the switch using Device Manager Port tab Following table describes the Port tab ﬁelds Click the Port tab. The Port tab appearsPort tab ﬁelds Field Description TX Stats tab Graphing Lldp transmit statistics Following table describes the TX Stats tab ﬁeldsTX Stats tab TX Stats tab ﬁelds Field DescriptionFollowing table describes the RX Stats tab ﬁelds RX Stats tabRX Stats tab ﬁelds Field Description 290 Conﬁguring the switch using Device Manager Local System tab Graphing Lldp receive statisticsLocal System tab appears Local Port tab Following table describes the Local System tab ﬁeldsLocal System tab Local System tab ﬁelds Field DescriptionFollowing table describes the Local Port tab ﬁelds Local Port tab ﬁelds Field DescriptionLocal Management tab Following table describes the Local Management tab ﬁeldsLocal Management tab Local Management tab ﬁelds Field DescriptionNeighbor tab Following table describes the Neighbor tab ﬁelds Neighbor tab ﬁelds Field DescriptionNeighbor Mgmt Address tab Neighbor Mgmt Address tab Neighbor Mgmt Address tab ﬁelds Field DescriptionUnknown TLV tab Following table describes the Unknown TLV tab ﬁeldsUnknown TLV tab Unknown TLV tab ﬁelds Field DescriptionOrganizational Deﬁned Info tab Organizational Deﬁned Info tabOrganizational Deﬁned Info tab ﬁelds Field Description Field Description 302 Conﬁguring the switch using Device Manager Conﬁguring ports using Device Manager Viewing and editing a single port conﬁgurationInterface tab for a single port Interface tab ﬁelds Interface tab ﬁeldsPort dialog box Interface tab Interface tab ﬁelds for a single port Field Description Viewing and editing multiple port conﬁgurations To view or edit the conﬁgurations of multiple portsInterface tab for multiple ports Interface tab for multiple portsInterface tab ﬁelds for multiple ports Field Description 310 Conﬁguring ports using Device Manager Administrative options available to you are Administering the switch using web-based managementViewing system information System Information Quick StartSystem Information page items Description Quick Start Conﬁguring system security Items on the Quick Start Section DescriptionRebooting the Ethernet Routing Switch 2500 Series From the main menu, choose Administration ResetReset warning message displays Reset page messageReset to Default page message Logging out of the management interfaceLogout message Administering the switch using web-based management Conﬁguring BootP, IP, and gateway settings Conﬁguring the switch using web-based managementSwitch conﬁguration options available to you are Following table describes the items on the IP IP page items Section Range DescriptionConﬁguring BootP, IP, and gateway settings Section Range DescriptionModifying system settings To conﬁgure system settings, use the following procedure System page items Range DescriptionType information in the text boxes Click Submit Conﬁguring switch port statusRange Description Following table describes the items on the Port Management Port ManagementPort row of your choice, select from the lists Click SubmitHigh Speed Flow Control Conﬁguring high speed ﬂow controlHigh Speed Flow Control page items Range Description To download a switch image, use the following procedure Downloading switch imagesSoftware Download Following table describes the ﬁelds on the Software Download Software Download page ﬁelds Fields Range DescriptionDownloading Ascii conﬁguration ﬁles 100 Mb/s port status LEDs ports 18 toAscii Conﬁguration ﬁle download Ascii Conﬁguration ﬁle download page items DescriptionConﬁguration File Setting items Range Description Type information in the text boxes, or select from a listParameters not saved to the conﬁguration ﬁle From the main menu, choose Conﬁguration Console/Comm Port Conﬁguring port communication speedConsole/Communication Port page items Conﬁguring Rate Limiting Conﬁguring Rate LimitingSelect from the list Rate Limiting Following table describes the items on the Rate LimitingRate Limiting page items Section Description Troubleshooting Diagnosing and correcting problemsInterpreting the LEDs Diagnosing and correcting problems Normal power-up sequence Port connection problemsNormal power-up sequence Corrective actions Symptom Probable cause Port connection problemsAutonegotiation modes Port interface Appendix a DB-9 RS-232-D Console/Comm Port connector DB-9 Console port connectorPin number Signal Ring indicator not usedAppendix B Default settings Factory default settings Field Default settingField Default setting Pvid Packet Type Both Snooping Disabled Field Default setting Field Default setting Field Default setting Appendix B Default settings Appendix C Sample BootP conﬁguration ﬁle Appendix C Sample BootP conﬁguration ﬁle Appendix D Command List CLI command list CommandSecurity Configuration and Management Nortel Ethernet Routing Switch Default tftp-server command Configuration IP Multicast NN47215-503 Ip default-gateway command No autosave enable command No banner command No logging remote level No snmp-server No tftp-server command Save config command Show banner command Show poe-port-status command Show running-config command Show terminal command Show tftp-server command Snmp-server host host-ip port Spanning-tree mstp max-hop 100 Terminal command Vlan create Appendix D Command List AC power speciﬁcations Parameter Operating specification Storage specificationAppendix E Technical speciﬁcations Environmental speciﬁcationsPerformance speciﬁcations Physical dimensionsNetwork protocol and standards compatibility Safety agency certiﬁcation Electromagnetic emissionsElectromagnetic immunity Index Index 132 EepromGbic No autotopology command Viewing 129 No banner commandIndex Index 181 Sntp 68, 68, 208Software version requirements Unix Index Index Page Overview System Conﬁguration

Interface tab for a single port

Step Action

2Do one of the following:

Copyright © 2007, Nortel Networks