Nortel Networks 2500 Series manual Configuring switch port status, Range Description

324Configuring the switch using web-based management

Item	Range	Description
System Up Time		The elapsed time since the last network management portion
		of the system was last re-initialized.

		ATTENTION
		This field is updated only when the screen is redisplayed.
System Name	1..255	Type a character string to create a name to identify the switch,
		for example Finance Group.
System Location	1..255	Type a character string to create a name for the switch location,
		for example, First Floor.
System Contact	1..255	Type a character string to create the contact information for the
		network manager or the selected person to contact regarding
		switch operation, for example, mcarlson@company.com
		ATTENTION
		To operate correctly with the Web interface, the system
		contact should be an e-mail address.

2Type information in the text boxes.

3Click Submit.

—End—

Configuring switch port status

You can use the Port Management page to configure a specific switch port or all switch ports to autonegotiate for the highest available speed of the connected station or you can set the speed for selected switch ports.

ATTENTION

Autonegotiation is not supported on 1000 Mb/s fiber optic ports.

You can disable switch ports that are trunk members, if you choose to disable them one by one. If you choose to disable all ports of the unit or stack, the changes cannot have effect on the ports belonging to MLTs.

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks