Nortel Networks 2500 Series manual Enabling Autopology, Show clock summer-time

Enabling Autopology 215

show clock time-zone

The show clock time-zonecommand is executed in the Global

Configuration command mode.

The show clock time-zonecommand has no parameters or variables.

Figure 74 "show clock time-zone output" (page 215) displays sample output from the show clock time-zone command.

Figure 74

show clock time-zone output

show clock summer-time

The show clock summer-timecommand displays the daylight savings time settings. The syntax for the show clock summer-timecommand is:

show clock summer-time

The show clock summer-timecommand is executed in the Global Configuration command mode.

The show clock summer-timecommand has no parameters or variables.

Figure 75 "show clock summer-time" (page 215) displays sample output from the show clock summer-time command.

Figure 75

show clock summer-time

Enabling Autopology

You can enable the Optivity* Autopology* protocol using the CLI. See www.nortel.com/support for information on Autopology. (The product family for Optivity and Autotopology is Data and Internet.) This section covers the following commands:

•"autotopology command" (page 216)

•"no autotopology command" (page 216)

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks