Nortel Networks 2500 Series manual Lldp tx-tlv command, No lldp tx-tlv command

Configuring LLDP using the CLI 221

lldp tx-tlv command

The lldp tx-tlvcommand specifies the optional TLVs to include in the transmitted LLDPDUs. The syntax for the lldp tx-tlvcommand is:

lldp tx-tlv [port <portlist>] [local-mgmt-addr] [port-desc] [sys-cap] [sys-desc] [sys-name]

The lldp tx-tlvcommand is executed in the Interface Configuration command mode.

Table 81 "lldp tx-tlv command parameters and variables" (page

221)describes the parameters and variables for the lldp tx-tlv command.

Table 81

lldp tx-tlv command parameters and variables

Parameters and	Description
variables
port <portlist>	Specifies the ports affected by the command.
local-mgmt-addr	Local management address TLV
port-desc	Port description TLV
sys-cap	System capabilities TLV
sys-desc	System description TLV
sys-name	System name TLV

no lldp tx-tlv command

The no lldp tx-tlvcommand specifies the optional TLVs not to include in the transmitted LLDPDUs. The syntax for the lldp tx-tlvcommand is:

no lldp tx-tlv [port <portlist>] [local-mgmt-addr] [port-desc]

[sys-cap] [sys-desc] [sys-name]

The no lldp tx-tlvcommand is executed in the Interface Configuration command mode.

Table 82 "no lldp tx-tlv command parameters and variables" (page

221)describes the parameters and variables for the no lldp tx-tlv command.

Table 82

no lldp tx-tlv command parameters and variables

Parameters and	Description
variables
port <portlist>	Specifies the ports affected by the command.
local-mgmt-addr	Local management address TLV

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks