Nortel Networks 2500 Series manual Agent tab

	Editing the chassis configuration 265
Field	Description
OperState	The current operational state of the
	component. The possible values are:
	• other--some other state
	• notAvail--state not available
	• removed--component removed
	• disabled--operation disabled
	• normal--normal operation
	• resetInProg--reset in progress
	• testing--doing a self test
	• warning--operating at warning level
	• nonFatalErr--operating at error level
	• fatalErr--error stopped operation
	The allowable (and meaningful) values are
	determined by the component type.
Ver	The version number of the component or
	subcomponent. If not available, the value is
	a zero length string.
SerNum	The serial number of the component or
	subcomponent. If not available, the value is
	a zero length string.
BaseNumPorts	The number of base ports of the component
	or subcomponent.
TotalNumPorts	The number of ports of the component or
	subcomponent.
IpAddress	The IP address of the component or
	subcomponent.

—End—

Agent tab

The Agent tab provides read-only information about the addresses that the agent software uses to identify the switch.

To open the Agent tab, use the following procedure:

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks