Nortel Networks 2500 Series Area Field Description, Polling, Web Management, Application Control

122Getting Started with Device Manager

Area	Field	Description
	Trace	The trace field is used to enable and disable SNMP
		tracing. When Trace is selected, SNMP protocol
		data units (PDUs) are displayed in the Device > Log
		dialog box.
	Listen for Traps	When selected (enabled), Device Manager listens
		for traps from the device.
	Max Traps in Log	The specified number of traps that may exist in the
		trap log. The default is 500.
	Trap Port	Specifies the UDP port that Device Manager listens
		to receive SNMP traps.
	Listen for Syslogs	When selected (enabled), Device Manager listens to
		the syslog.
	Confirm row deletion	A dialog box displays when checked, before deleting
		a row.
	Default Read	Specifies the default read community.
	Community
	Default Write	Specifies the default write community.
	Community
Polling	Status Interval	Interval at which status information is gathered
		(default is 20 seconds).
	Hotswap Detect	The interval at which Device Manager detects the
	every:	module information. The default is 1 interval.
	Enable	Enables (true) or disables (false) periodic polling of
		the device for updated status. If polling is disabled,
		the chassis status is updated only when you click
		Refresh on the Chassis tab.
Web Management	Http Port	Default port is 80. This field specifies the HTTP port
		for the application. To access the Device Home Page
		using the Web, ensure that the HTTP Port attribute
		matches the switch configuration. If you change the
		port number, the system prompts you with a warning
		message.
Application Control	Application launch	Enabled by default, you can modify this field only
	with ring tone	when configuring the Device Manager default
		properties. You cannot modify this field when
		configuring the per device properties.
	Save SNMPv3	Disabled by default, if you enable this field you are
	Devices to Open	prompted with a security warning message because
	Last	any user can access the device without entering the
		SNMPv3 security criteria if this feature is enabled.
		You can modify this field only when configuring the

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks