Nortel Networks 2500 Series manual Configuring system security

314Administering the switch using web-based management

Table 141

Items on the Quick Start page

Section	Item	Description
IP	In-Band Switch	Specify a new IP address for the
	IP Address	switch.
	In-Band Subnet	Enter a new subnet mask.
	Mask
	Default	Specify an IP address for the
	Gateway	default gateway.
Community	Read-Only	Specify a character string to
String	Community	identify the community string for the
	String	SNMPv1 Read-Only community,
		for example, public or private.
		Re-enter character string to verify.
		The default value is public.
	Read-Write	Specify a character string to
	Community	identify the community string for the
	String	SNMPv1 Read-Write community,
		for example, public or private.
		Re-enter character string to verify.
		The default value is private.
Trap Receiver	Index	Select the number of the Trap
		Receiver to create or modify.
	IP address	Specify the network address for the
		SNMP Manager that is to receive
		the specified Trap.
	Community	Type the Community String for the
		specified Trap Receiver. Re-enter
		Community String to verify.
VLAN	Quick Start	Specify the IP of the port-based
	VLAN	Quick Start VLAN.

—End—

Configuring system security

For information on configuring system security, please see Nortel Ethernet Routing Switch 2500 Series Security — Configuration and Management (NN47215-505).

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks