Nortel Networks 2500 Series manual Identifying unit numbers

			Identifying unit numbers 155
Stack Numbering screen fields
Field	Item	Range	Description
Stack Numb	Current Unit	1..8	Unit number previously assigned to the
ering Setting	Number		policy switch. The entries in this column are
			displayed in order of their current physical
			cabling with respect to the base unit, and
			can show non-consecutive unit numbering
			if one or more units were previously moved
			or modified. The entries also can include
			unit numbers of units that are no longer
			participating in the stack (not currently
			active).
	MAC Address	XX.XX.XX.XX.XX.X	MAC address of the corresponding unit
		X	listed in the Current Unit Number field.
	New Unit	1..8, None	Choose a new number to assign to your
	Number
			selected policy switch.
			ATTENTION
			If you leave the field blank, the system
			automatically selects the next available
			number.

2Choose the new number to assign to the switch.

3Click Submit.

4A message prompts for confirmation of the request. Click Yes.

—End—

Identifying unit numbers

Identify the unit numbers of the switches participating in a stack configuration by viewing the LEDs on the front panel of each switch.

To identify unit numbers in your configuration:

Step Action

1Open the Identify Unit Numbers screen by selecting Summary > Identify Unit Numbers from the menu. This screen is illustrated in Figure 52 "Identifying Unit Numbers page" (page 156).

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks