Nortel Networks 2500 Series manual Appendix B Default settings

343

Appendix B

Default settings

The following table lists the factory default settings for the Ethernet Routing Switch 2500 Series.

Table 155

Factory default settings

Field	Default setting
BootP Request Mode	BootP or Default IP
In-Band Switch IP Address	192.168.1.1
In-Band Subnet Mask	255.255.255.0
Default Gateway	0.0.0.0
	(no IP address assigned)
Read-Only Community String	public
Read-Write Community String	private
Trap IP Address	0.0.0.0
	(no IP address assigned)
Community String	Zero-length string
Autotoplology	Enabled
Authentication Trap	Enabled
Link Up/Down Trap	Enabled
Reset Count	1 (This is the value only when the flash memory
	is erased. Even if you reboot the switch to factory
	defaults, the Reset Count increases and is equal to the
	number of times the switch restarted from the last flash
	memory erase.)
Last Reset Type	Power Cycle
sysContact	Zero-length string
sysName	Zero-length string
sysLocation	Zero-length string

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks