Nortel Networks 2500 Series manual Interface tab for multiple ports

308Configuring ports using Device Manager

ATTENTION

When you edit multiple ports, some tabs are not available, and some tabs are available even though the options are not applicable. When the option does not apply for a given port, NoSuchObject is displayed.

—End—

Interface tab for multiple ports

The Interface tab shows the basic configuration and status of the selected ports.

To view or edit the Interface tab for multiple ports, use the following procedure:

Step Action

1Select the ports that you want to edit.

Press Ctrl+left click the ports that you want to configure. A yellow outline appears around the selected ports.

2Do one of the following:

•From the shortcut menu, choose Edit.

•From the Device Manager main menu, choose Edit > Port.

The Interface tab shows port interface statistics.

Figure 111

Interface tab for multiple ports

—End—

Table 139 "Interface tab fields for multiple ports" (page 309) describes the Interface tab fields for multiple ports.

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks