Nortel Networks 2500 Series manual Configuration Management, No ip domain-name command

188System configuration using the CLI

Table 55

ip domain-name command parameters and variables

Parameters and	Description
variables
<LINE>	Enter a DNS domain name.

The default value for this command is an empty string.

no ip domain-name command

The no ip domain-namecommand clears the system’s DNS domain name (sets it to an empty string). The syntax for the no ip domain-namecommand is:

no ip domain-name

The no ip domain-namecommand is executed in the Global

Configuration command mode.

The no ip domain-namecommand has no parameters or variables.

default ip domain-name command

The default ip domain-namecommand clears the system’s DNS domain name (set it to an empty string). The syntax for the default ip domain-namecommand is:

default ip domain-name

The default ip domain-namecommand is executed in the Global Configuration command mode.

The default ip domain-namecommand has no parameters or variables.

Configuration Management

This section covers the following topics:

•"Automatically loading Configuration file" (page 188)

•"ASCII Configuration Generator" (page 191)

Automatically loading Configuration file

This section discusses how to download a configuration file when the system boots. You use standard CLI commands to modify the configuration file you want to download. This section contains information about the following commands:

•"configure network command" (page 189)

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks