Nortel Networks 2500 Series manual Show lldp command parameters and variables

224System configuration using the CLI

Table 86 "default lldp status command parameters and variables" (page

224)describes the parameters and variables for the default lldp status command.

Table 86

default lldp status command parameters and variables

Parameters and	Description
variables
port <portlist>	Specifies the ports affected by the command.

show lldp command

The show lldp command displays configuration data for LLDP. The syntax for the show lldp command is:

show lldp [local-sys-data] [mgmt-sys-data] [pdu-tlv-size] [stats]

The show lldp command is executed in the User Exec command mode.

Table 87 "show lldp command parameters and variables" (page

224)describes the parameters and variables for the show lldp command.

Table 87

show lldp command parameters and variables

Parameters and	Description
variables
local-sys-data	Displays local LLDP system data.
mgmt-sys-data	Displays LLDP management data.
pdu-tlv-size	Displays 802.1ab tlv in pdu.
stats	Displays LLDP statistics.

Figure 78 "show lldp local-sys-data command output" (page 225) displays the output from the show lldp local-sys-data command.

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks