264Configuring the switch using Device Manager

Field

Description

ATTENTION

1.This field is applicable only to components that can be found in either the Board or Unit groups. If the information is unavailable, for example, the chassis is not modeling a virtual chassis or component is not in Board or Unit group, the value is a zero length string.

2.If this field is applicable and is not assigned a value through a SNMP SET PDU when the row is created, the value defaults to the value of the object s5ChasComSerNum.

LstChng

The value of sysUpTime when it was

 

detected that the component/sub-component

 

was added to the chassis. If this action has

 

not occurred since the cold/warm start of the

 

agent, then the value is zero.

 

 

AdminState

The state of the component or subcomponent.

 

The values that are read-only are:

 

other – currently in some other state

 

notAvail – actual value is not available

The possible values that can be read and written are:

disable—disables operation

enable—enables operation

reset—resets component

test—starts self test of component, with the result to be normal, warning, nonFatalErr, or fatalErr in object s5ChasComOperState The allowable (and meaningful) values are determined by the component type.

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks

Page 264
Image 264
Nortel Networks 2500 Series manual 264 Configuring the switch using Device Manager