316Administering the switch using web-based management

Changing the Ethernet Routing Switch 2500 Series to system defaults

You can replace all configured switch parameters with the factory default values.

CAUTION

If you choose change to default settings, all configured settings are replaced with factory default settings when you click Submit. For more information about factory default settings, see Appendix "Default settings" (page 343).

During the process of changing to default settings, the switch initiates a self-test that comprises various diagnostic routines and subtests. The LEDs display various patterns to indicate that the subtests are in progress.

To change the Ethernet Routing Switch 2500 Series to system defaults:

Step Action

1From the main menu, choose Administration > Reset to Default. The reset to default warning message displays.

Figure 116

Reset to Default page message

—End—

Logging out of the management interface

To log out of the Web-based management interface, use the following procedure:

Step Action

1From the main menu, choose Administration > Logout. A logout message displays.

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks

Page 316
Image 316
Nortel Networks 2500 Series manual Logging out of the management interface, Reset to Default page message