Nortel Networks 2500 Series manual Topology Table tab, Diagnostics dialog box Topology tab

280Configuring the switch using Device Manager

→From the Device Manager menu bar, select Edit > Diagnostics > Topology. The Toplogy dialog box appears with the Topology tab displayed.

Figure 98

Diagnostics dialog box Topology tab

Table 126 "Topology tab fields" (page 280) describes the Topology tab fields.

Table 126

Topology tab fields

Field	Description
IpAddr	The IP address of the device.
Status	Whether Nortel topology is on (topOn) or off (topOff) for the
	device. The default value is topOn.
NmmLstChg	The value of sysUpTime the last time an entry in the network
	management MIB (NMM) topology table was added, deleted,
	or modified. If the table has not changed since the last cold
	or warm start of the agent.
NmmMaxNum	The maximum number of entries in the NMM topology table.
NmmCurNum	The current number of entries in the NMM topology table.

Topology Table tab

To view more topology information, use the following procedure:

Step Action

1From the Device Manager menu bar, choose Edit > Diagnostics > Topology.

The Topology dialog box appears with the Topology tab displayed.

2Click the Topology Table tab. The Topology Table tab appears.

Nortel Ethernet Routing Switch 2500 Series

Overview — System Configuration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007

Copyright © 2007, Nortel Networks