ZyXEL Communications ES-3024 manual GUI-based FTP Clients, FTP over WAN Restrictions

Dimension ES-3024 Ethernet Switch

renames it “rom-0”. Likewise “get rom-0 config.rom” transfers the configuration file on the switch to your computer and renames it “config.rom.” See earlier in this chapter for more information on filename conventions.

Step 7. Enter “quit” to exit the ftp prompt.

18.4.3GUI-based FTP Clients

The following table describes some of the commands that you may see in GUI-based FTP clients.

	Table 18-2 General Commands for GUI-based FTP Clients
COMMAND		DESCRIPTION
Host Address		Enter the address of the host server.
Login Type		Anonymous.
		This is when a user I.D. and password is automatically supplied to the server for
		anonymous access. Anonymous logins will work only if your ISP or service
		administrator has enabled this option.
		Normal.
		The server requires a unique User ID and Password to login.
Transfer Type		Transfer files in either ASCII (plain text format) or in binary mode. Configuration and
		firmware files should be transferred in binary mode.
Initial Remote Directory		Specify the default remote directory (path).
Initial Local Directory		Specify the default local directory (path).

18.4.4FTP over WAN Restrictions

FTP over WAN will not work when:

Telnet service is disabled in Secured Client Sets.

The IP address(es) in the Secured Client Sets menu does not match the client IP address. If it does not match, the switch will disconnect the Telnet session immediately.

18-4 Firmware and Configuration File Maintenance